My 3 year old M3P (20k miles) has a bit corrosion on discs but I now also hear a very faint rubbing noise from nearside front when creeping along with windows down next to parked cars etc. So the brakes need some good use and a clean.
I’ve done some 50-0mph stops repeatedly with ReGen on Low, but noise is still there (very faint mind). So I thought let’s try the Brake Burnishing facility in Service Mode as it turns off ReGen completely, before I take it in to Tesla SC for brake strip and clean. Problem is when I enter Service Mode I see GTW Locked, but importantly Speed Limited, and can only drive the car up to a max of 7mph which is absolutely no good!
Has anybody tried Brake Burnishing and come across the Speed Limit whilst in Service Mode?
Thanks, Mark.
I’ve done some 50-0mph stops repeatedly with ReGen on Low, but noise is still there (very faint mind). So I thought let’s try the Brake Burnishing facility in Service Mode as it turns off ReGen completely, before I take it in to Tesla SC for brake strip and clean. Problem is when I enter Service Mode I see GTW Locked, but importantly Speed Limited, and can only drive the car up to a max of 7mph which is absolutely no good!
Has anybody tried Brake Burnishing and come across the Speed Limit whilst in Service Mode?
Thanks, Mark.
Attachments
Last edited: