You can install our site as a web app on your iOS device by utilizing the Add to Home Screen feature in Safari. Please see this thread for more details on this.
Note: This feature may not be available in some browsers.
Haven't seen issue 1, will check it out, but I never use anything above 1 or 2. On issue 2, do you mean the menu for settings and the like? Do not have that. I'd say something got corrupted. You might want to try a full power down from the menu to see if it helps, and then call it in (good luck from what I'm hearing lately).Installed 2019.24.4 last week. I always reboot and off the car after every update, sometimes multiple times, if needed.
Two issues I noticed immediately:
- On TACC (distance=7), the car slams on the brake if it see a parked car on the road shoulder ahead, or a car ahead is turning to a side street
- All screen tabs showed up gibberish with garbled fonts, reboot again and again, and .... again
Pathetic.
do you mean the menu for settings and the like?
Why would it change ‘when you are on the road’? Is that what you are saying. Doesn’t make sense to me. I reboot also after every firmware release but have never seen label corruption, stable or changing.Yes, Control, and different tabs on 17". It seems OK for now. It's my long habit to reboot multiple times and full power down (off the car for 5 minutes) after any update I install. Still, too frustrating and even unsafe when you get on the road and need to access one of those screen tabs only to see garbled fonts. Like blindfolded and just randomly guessing where to press.
Why would it change ‘when you are on the road’?
This happened to me when I got the 2019.20.4.2. The fans were just running at all times. After a couple of days, I lost my A/C. Had to reset the car by sitting in it, and go through control, security screen and reset. After the reset, things seems to be running ok.My car hasn’t slept since the 24.4 update was installed according to Teslafi....
Can anybody comment on phantom braking in this release vs 2019.20.x? This post suggests it has regressed again: Phantom braking will get a lot worse before it gets better
I haven't noticed any issues on the S with this release but we did go under a bridge with the 3 and phantom braking kicked in. I was surprised since it's been so long since we've had such a severe decrease in speed like that. I haven't taken the S on the same road so I should probably try to recreate it and see if the S has the same issue there.Can anybody comment on phantom braking in this release vs 2019.20.x? This post suggests it has regressed again: Phantom braking will get a lot worse before it gets better
Use the browser, that seems to be the easiest way for me to cause the display to go corrupt again.Still, too frustrating and even unsafe when you get on the road and need to access one of those screen tabs only to see garbled fonts. Like blindfolded and just randomly guessing where to press.
Use the browser, that seems to be the easiest way for me to cause the display to go corrupt again.
I got my 2019.24.4 update on 7/22. When I drove on hwy this evening using AP set at 70mph on 55 speed limit, suddenly in the middle of heavy traffic the speed dropped to 35mph and it assumed it was 30 mph speed limit while still on AP. I corrected it manually right away in fraction of second. But it was scary. I have never seen that drop in speed before this update. I had set the distance to 1 car length. I had 2019.20.4.2 before. MCU2, AP 2.5, Oct 2018 build.
In contrast to some of the other posts loss of range on sentry mode was minimal, 6 miles for a total of 8 hrs on a 90 deg day when it was parked in a lot with no shade. Not bad.
With this update I’m now able on two lane highways to change from the right to the left lane. Prior to this it would only allow lane changes left to right.
I mean use the browser to cause the problem. It's been directly cause and effect for me. I don't know if there is another cause but it seems like it happens right after using the browser, and less often if I don't use it.Thanks. Do you mean use or don't use the browser?
If you wait a few minutes, it usually shows the correct location once it finishes booting up, assuming the car has signal.I just installed this update, and now the app is showing the car at a location hundreds of miles away.