Looking at some aftermarket wheels for my 22 LR AWD. Goals are to get a lighter or same weight wheel compared the Aero 18" wheel, better looks, lower offset as the stock wheels are sunken in a bunch and would like to reuse the original Michelin MXM4 and TPMS.
Right now I have it narrowed down to a few options.
1. OZ Ultraleggera in 18x9 +35 offset (21 lbs) or 18x8 +35 offset (18.3 lbs)
2. Enkei RPF1 in 18x8.5 +30 offset (18.3 lbs)
I wanted to confirm both these will fit without any fitment issues. The OZ's are half and inch wider and 5MM offset lower than the Aero wheels and the Enkei's are the same width but 10MM lower offset. I'd assume both would fit the factory 235 tires just fine and should stick out towards the outboard side to fill out the wheel wells a bit better and not look so sunken in?
If anyone has experience or pics with these wheels please share!
Right now I have it narrowed down to a few options.
1. OZ Ultraleggera in 18x9 +35 offset (21 lbs) or 18x8 +35 offset (18.3 lbs)
2. Enkei RPF1 in 18x8.5 +30 offset (18.3 lbs)
I wanted to confirm both these will fit without any fitment issues. The OZ's are half and inch wider and 5MM offset lower than the Aero wheels and the Enkei's are the same width but 10MM lower offset. I'd assume both would fit the factory 235 tires just fine and should stick out towards the outboard side to fill out the wheel wells a bit better and not look so sunken in?
If anyone has experience or pics with these wheels please share!