M3P Track Part Out

[Lunares]

Hi All,

Life changes have dictated that I hit pause on my track endeavors for the time being.
As a result, I will be returning my car to stock and selling the following parts (parts have less than 250 miles on them and are essentially brand new):

Motion Control Suspension (MCS) Motorsport quality coilovers - $4000
Included items:
MCS 2WNR Dampers (2 way adjustable none remote reservoir)
MCS FSA Front spring adapter kit
MCS SBB Sway Bar Bracket Set
eb0600.225.0800 Eibach 6 inch 2.25ID 800lb spring (Front)
eb0600.250.1000 Eibach 6 inch 2.50ID 1000lb spring (Front)
GC WCS Ground Control Weight Jacket set and rear upper spring pad
EIBACH-SPACER225 Eibach 2.25 IS Spring Spacer
EIB TSPRING Eibach tender springs

This is an exceptionally capable track set up and it is very usable on the street for daily driving duties


I also have:
MountainPass Performance SS brake lines (brand new, never installed) - $120
MountainPass Performance Arastradero Camber Arms (rear) - $325
MountainPass Performance Arastedero Toe Arms (rear) - $325
Unplugged Performance Adjustable Sway bars (front and rear) - $500

I am willing to ship in the continental US (at buyers cost).
Paypal fees (if applicable) are the buyers responsibility.

Parts will be available as of Tuesday 9/24.

Questions are welcome!

Thanks!

You have front listed twice for springs, is that 800 lb/in front and 1000 lb/in rear?

Is the sway bar bracket necessary? What if I want to remove my sway bars?

Why was a spring spacer necessary?

What ride height are these setup for / adjustability?

GC WCS Ground Control Weight Jacket set and rear upper spring pad <- what does this do?

What is MCS's policy for resale? Will they still support any upgrades or revalving if I ended up changing the spring rates or other support?

 

[maverick1099]

Ah yes that is a typo.
1000 in the back, 800 in the front.

The sway bar bracket is a little Al machined part that bolts up to the collar, so it you were to run no sway bars I don't see any reason you couldn't remove the bracket.

Spring spacer is there to alloy you to set the height in the front (as far as I know)

They are adjustable so you can pick your height. I was set up for about 1-1.5" drop (about 2 finger widths from tire to fender)

Weight jacks do the following per GC:
"Developed by Ground Control to address the issue of inconsistent spring rate caused by bending of the spring during suspension movement. As an added bonus, this is adjustable from underneath the car without jacking the car up."

You would have to ask MCS but I see no reason that they would refuse a revalve or upgrade. I can put you in contact with my contacts if you pick up the system.

 

[maverick1099]

Still available

 

[Ubersoph]

Do you happen to have the brake pads you used on track, even if they are severely worn?

 

[destructure00]

Do you happen to have the brake pads you used on track, even if they are severely worn?

What do you needed worn pads for? I dumped my worn stock pads in the trash this weekend, it gets picked up tomorrow morning. I can dig them out if you can use them for something?

 

[maverick1099]

I don't think I have them any more...

 

[Ubersoph]

What do you needed worn pads for? I dumped my worn stock pads in the trash this weekend, it gets picked up tomorrow morning. I can dig them out if you can use them for something?

too late now I bet, but I was going to use the pads to send to project mu so they can make pads for the community.

 

[destructure00]

too late now I bet, but I was going to use the pads to send to project mu so they can make pads for the community.

Yeah they got picked up last week. Sorry.

 

[Lunares]

too late now I bet, but I was going to use the pads to send to project mu so they can make pads for the community.

I have some P3D stock pads from when I swapped to RB XT910. No real purpose to ever put them back in if you are interested

 

[maverick1099]

Coil overs and wheels/tires are still available

 

[Ubersoph]

I have some P3D stock pads from when I swapped to RB XT910. No real purpose to ever put them back in if you are interested

You have a PM.

maverick1099, I guess you get a free bump?

 

[maverick1099]

It would appear so!

 

[maverick1099]

bump!

 

[maverick1099]

MCS and wheels are still available

 

[maverick1099]

bump

 

[maverick1099]

MCS coilovers and wheels still available

 

[maverick1099]

bump!

 

[nikhil726]

MCS coilovers and wheels still available

how much for the coilovers and wheels?

 

[maverick1099]

Motion Control Suspension (MCS) Motorsport quality coilovers - $4000
Included items:
MCS 2WNR Dampers (2 way adjustable none remote reservoir)
MCS FSA Front spring adapter kit
MCS SBB Sway Bar Bracket Set
eb0600.225.0800 Eibach 6 inch 2.25ID 800lb spring (Front)
eb0600.250.1000 Eibach 6 inch 2.50ID 1000lb spring (Front)
GC WCS Ground Control Weight Jacket set and rear upper spring pad
EIBACH-SPACER225 Eibach 2.25 IS Spring Spacer
EIB TSPRING Eibach tender springs

This is an exceptionally capable track set up and it is very usable on the street for daily driving duties

Set of 4 Apex EC-7's in perfect condition.
SKU: EC71895ET35AN-45
Finish:Anthracite

The come with Bridgestone Potenza S007A tires on them (265's) with about 60% tread left.

$1500 for wheels and tires

 

[maverick1099]

Wheels and tires sold.
MCS coilovers are still available