You can install our site as a web app on your iOS device by utilizing the Add to Home Screen feature in Safari. Please see this thread for more details on this.
Note: This feature may not be available in some browsers.
I ordered and received the TAPTES usb hub pro on Amazon at the beginning of August. I received this email directly from TAPTES a week later. I haven’t seen anyone else post this.
...powered by what?
The ports themselves (the USB-A ones anyway) can't give you more than about 2.5a each if doing nothing but giving power.
Navaks gen1 intelligent splitter can offer you 2.1a of that, or ~10 watts, of charging power on one of its ports with the other available for data and ~.4a to power the data device plugged in there- all plugged into a single USB-A port in the car and taking up very little room.
If you want/need faster than that you'll need to plug into the 12v in the center console (or wire something yourself into a 12v line) and which point there's already tons of stuff that'll give you all the fast charging ports you want and you can use the front USB ports just for data.
is there any concern sharing the usb ports with 2 USB gamepads on the side with the USB drive for sentry? Does teslacam/sentry mode become less reliable when more things are being shared on the same USB port?
I fitted the USB-A version of the Taptes USB Hub Pro - data and power on all plugs.Have a
Works with my wireless charger and runs my game controller and sentry USB stick without issues.
Seems that 2020.40.3 screwed up the USB somehow, keeps alerting about the dash cam usb drive not being 4mb or faster. Its been working for over a year without issues. Hoping 40.4 fixes that.
Yep same here now, 40.4 seems to have fixed the USB and bluetooth issues of 40.3.I went from 2020.36.16 to 40.4 without any errors using my Taptes Hub Pro and a WD Purple Endurance 256gb micro sd card
Ive been getting USB malfunction errors on the Taptes Hub pro so I replaced it with the old taptes hub which seems incredible unreliable (it would just lose USB connection on the slightest touch). Anyone else having issues with the hubs on the latest updates or is my USB port just going bad - or maybe the hub is bad?
Plugging in directly with a cable or the drive directly seems to work fine
No problem for me. Working fine with latest updates (2020.48.26).
My one gripe with the hub is that it's really hard to put into place. In my early 2018 Model 3, the fit is very tight. Maybe it's better with more recent cars. It took a lot more force than it should have to push it down into the recesses of console. When I went to insert it the first time, the alignment must not have been perfect, because when I plugged it in, I heard a metallic scraping sound and it wouldn't fully insert. After removing it, I saw that the metallic lip of one of the car's USB ports was bent and it would not accept any USB-A plug. Thankfully, I was able to straighten it out with needle-nose pliers and got the hub in place. That probably would have been an expensive service appointment.
hi Where did you get the Pro Hub from looking for one but cant find one even TAPTES dont have oneI received my Taptes USB Hub Pro yesterday (ordered 6 July, so 3 weeks in total, not bad). It's got a nice soft-touch front finish, I've not taken it apart, but reading the instruction sheet that comes with it suggests that there are two USB hubs split left/right across the two external and one internal USB-A ports.
So far power and data are OK on all ports. I've also got the 'Taptes wireless charger for Tesla Model 3 15W' and this works OK connected alongside USB storage and game controller in the Hub Pro; charging speed is obviously limited by the hub input, my iPhone XS Max just about maintains charge when using Google Maps, and charges OK when not using phone nav. I've considered the mod as mentioned by @dmurphy above but as it's a new leased car I'm a bit nervous about doing it...
I don't have a widget to measure output current but attach some photos for info. Overall very pleased for the price.
View attachment 569990
View attachment 569992
View attachment 569995
View attachment 569996
(I've removed the 'press here' sticker on the front now I'm happy it all works as expected!)
I bought it directly from Taptes website; maybe they have given up producing them seeing as the new refresh interiors have been around for 18 months, lack of demand from new drivers? EBay might be your best bet.hi Where did you get the Pro Hub from looking for one but cant find one even TAPTES dont have one