Hi everyone, thanks in advance for reading my question. I hope my terminology is okay, I've read many of the excellent forums, but don't see one related to this issue.
I have a recently installed (2 weeks ago) 4.08kw system with two powerwalls, Solaredge HD wave inverter, pre-PTO and I tried testing the system off-grid. This was the third time I tried this, the other times there were no issues and ran great for 1-2 hours each time.
I tried it again today and this is what happens:
Thanks again for your advice.
I have a recently installed (2 weeks ago) 4.08kw system with two powerwalls, Solaredge HD wave inverter, pre-PTO and I tried testing the system off-grid. This was the third time I tried this, the other times there were no issues and ran great for 1-2 hours each time.
I tried it again today and this is what happens:
- Place disconnect switch inside the TEG to off
- Turn on inverter
- After about 5 minutes, production starts
- After 5-10 minutes a rapid series of clicks comes from the inverter and it stops production
- On the inverter, the green LED and blue LED come on, the green one flashes for a while, blue goes off, then the green one goes to solid green
- After about 5-10, and sometimes 20 minutes, the inverter clicks again and production starts, powers the house, charges powerwalls
- Then it goes back to step 4 and repeats over and over
Thanks again for your advice.