Does anybody have any fix or workaround for the front and falcon wing doors "timing out." Both times last week I had problems after the last update were because the car interior was getting cleaned and the doors were open about 5-10 minutes. It didn't happen to all doors, but one falcon wing one time and the front passenger door the other time (only happened on one door each time). The SC guys mentioned that most likely the car automatically went to sleep to prevent battery drainage and it caused the door to not know where it was when it woke up. Turns out the front passenger latch is scheduled to get replaced in the next few days, since the recalibration didn't work (the software problem made the hardware problem apparent).
Before the update about 8 days ago, I didn't really have this problem. Has anybody found some kind of workaround to keep this from happening or to keeping the car "awake" while it is cleaning, getting windows tinted, etc. This seems like a relatively simple software fix, where it just gives us a "showroom / cleaning mode" or automatically saves the last position of the doors every time before it goes to sleep. Maybe the new software update already fixed it (I haven't had the chance to check)? Something that seems very simple and trivial (like latching) can cause a big headache
Before the update about 8 days ago, I didn't really have this problem. Has anybody found some kind of workaround to keep this from happening or to keeping the car "awake" while it is cleaning, getting windows tinted, etc. This seems like a relatively simple software fix, where it just gives us a "showroom / cleaning mode" or automatically saves the last position of the doors every time before it goes to sleep. Maybe the new software update already fixed it (I haven't had the chance to check)? Something that seems very simple and trivial (like latching) can cause a big headache