SC confirmed for FSD upgrade(MCU1, AP2.5)

[BCBCKIM]

SC confirmed my request and part has been ordered. Anyone else has done yet I should be aware of some? Thx. And I am not doing infotainment upgrade.

 

[ramting]

Infotainment more useful than ap3.0 imo. That mcu1 is brutally slow compared to mcu2

 

[DriveMe]

Please keep us posted on the progress and results!

 

[MrTomP]

SC confirmed my request and part has been ordered. Anyone else has done yet I should be aware of some? Thx. And I am not doing infotainment upgrade.

Just curious, why chose FSD upgrade before MCU upgrade?

 

[BCBCKIM]

Just curious, why chose FSD upgrade before MCU upgrade?

I bought my car with FSD option in 2017, and i just dont need mcu2.

 

[ramting]

I bought my car with FSD option in 2017, and i just dont need mcu2.

I declined a car with mcu1 and bought a car with mcu2. Mcu1 was so laggy I couldn’t handle it

 

[Falcon_Heavy]

please keep us posted on your upgrade.. Interested in how MCU1 plays out with HW3.0

 

[croman]

SC confirmed my request and part has been ordered. Anyone else has done yet I should be aware of some? Thx. And I am not doing infotainment upgrade.

Which part did they order for you?

 

[Chancellor32]

Dang! Let us know how it goes, I’m hoping the MCU2 upgrade will be free if the MCU1 doesn’t work with HW3.

 

[BCBCKIM]

Which part did they order for you?

Part number 1655000-70-I
ASSY, Autopilot.ECU,3.0,MSX-FUSED

 

[GWord]

Mine was confirmed as well. MCU1 with AP2.5. I reconsidered and added an MCU2 upgrade to the scope today so alas, won’t have results to report back to you all on. But they did confirm my original appointment, even to the point of modifying my service type category from “other” to “Autopilot” or something like that.

 

[Michelx]

SC confirmed my request and part has been ordered. Anyone else has done yet I should be aware of some? Thx. And I am not doing infotainment upgrade.

Looking forward to have invites starting to come here in Canada !

 

[BCBCKIM]

So just installed FSD computer today with SW version 2020.12.11.5 and here is the first problems after 20miles driving.
1. No FSD visualizations option
2. Autopilot disengaged and cruise control disabled message appears(i did hard reset, no luck)
3. Ultrasonic sensors are super sensitive. Any objects close by it will continue to give warning chim, sooo annoying.

I made new appointment next week, hopefully new update can solve the issue.

 

[DriveMe]

So just installed FSD computer today with SW version 2020.12.11.5 and here is the first problems after 20miles driving.
1. No FSD visualizations option
2. Autopilot disengaged and cruise control disabled message appears(i did hard reset, no luck)
3. Ultrasonic sensors are super sensitive. Any objects close by it will continue to give warning chim, sooo annoying.

I made new appointment next week, hopefully new update can solve the issue.

I think you need to wait for the calibration to complete (drive it for a few more miles). Your screenshot above says it’s 93% complete.

 

[BCBCKIM]

So just installed FSD computer today with SW version 2020.12.11.5 and here is the first problems after 20miles driving.
1. No FSD visualizations option
2. Autopilot disengaged and cruise control disabled message appears(i did hard reset, no luck)
3. Ultrasonic sensors are super sensitive. Any objects close by it will continue to give warning chim, sooo annoying.

I made new appointment next week, hopefully new update can solve the issue.

Ok SC pushed out same firmware version again and now everything fixed.
1. Full FSD visualizations(You still dont see on Autopilot setting)
2. Sensor chim is gone.

At this point, unless you need for entertainment features, FSD is really no requiring MCU2. I dont feel any difference of speed on MCU1.

 

[spentan]

Ok SC pushed out same firmware version again and now everything fixed.
1. Full FSD visualizations(You still dont see on Autopilot setting)
2. Sensor chim is gone.

At this point, unless you need for entertainment features, FSD is really no requiring MCU2. I dont feel any difference of speed on MCU1.

So are you saying that you're seeing full FSD Visualizations on MCU1 and related IC?

Please let us know how it behaves over the next few days. I'm about to go in for MCU2+AP3 Update,

 

[Michelx]

Ok SC pushed out same firmware version again and now everything fixed.
1. Full FSD visualizations(You still dont see on Autopilot setting)
2. Sensor chim is gone.

At this point, unless you need for entertainment features, FSD is really no requiring MCU2. I dont feel any difference of speed on MCU1.

Is the web browser improved with FSD computer and 2020.12.11.5 firmware ? Thanks.

 

[BCBCKIM]

So are you saying that you're seeing full FSD Visualizations on MCU1 and related IC?

Please let us know how it behaves over the next few days. I'm about to go in for MCU2+AP3 Update,

Yes. Full visualizations with MCU1.(i have june 2019 M3, and all the same).

 

[BCBCKIM]

Is the web browser improved with FSD computer and 2020.12.11.5 firmware ? Thanks.

No, still slow unusable.

 

[BCBCKIM]

Ok SC pushed out same firmware version again and now everything fixed.
1. Full FSD visualizations(You still dont see on Autopilot setting)
2. Sensor chim is gone.

At this point, unless you need for entertainment features, FSD is really no requiring MCU2. I dont feel any difference of speed on MCU1.

I mean no extra lag after FSD upgrade. Of course you cant compare with MCU2.