You can install our site as a web app on your iOS device by utilizing the Add to Home Screen feature in Safari. Please see this thread for more details on this.
Note: This feature may not be available in some browsers.
I’m sure you’re right but I’d check your power usage. There is a definite difference between quiet, low activation periods and busy, high activation/save periods. There is a marked power use difference.Not really. Sentry Mode recording all the time even without anything triggering it. It saved the clips in the 60 min (180 files) folder of RecentClip just like DashCam does. The older clips get deleted in that folder so it is always 60 min. Now when something triggered the "HAL 2000", it will move 30 to 33 of those files (Triggered Minute + Previous 9 Minutes + a partial minute after the trigger) to a timestamped folder under SavedClip folder. It always use about 1 mile per hour when Sentry Mode is on. When it is on, the car does not sleep. You can tell because if you try to connect it with the app, it comes up immediately (or really fast).
To avoid running out of space on USB drive, you need to know how to park. Do not ever face a direction with heavy foot traffic. Cars traffic is fine.. it only trigger on human traffic. Best place to park is with front facing another car. Drivers and passengers parked next to you on the side entering/existing will trigger it. I once parked at a doctor office, and the driver of the car next to me go in and out of his car like 10 times in one hour. I came back and had to go thru like 10 folders full of clips of him... I almost wanted to wait for him to come again and ask him why are you getting in and out of your car so many freaking times????
Are you new to tech or something?
The poster was just posing an unexpected performance parameter he was trying to get feedback on.
This type of confirmation is normal esp. with new technologies.
You are new to tech.Are you new to the forum or did you just miss the other 100 similar complaints...you know like, I just got something for free and it’s not perfect, so I’ll complain.
“New to tech” tech is as old as mankind.You are new to tech.
Knew it.
It's ok. Being a gimp beta tester doesn't hurt at all....
I just leave sentry mode turned on and exclude locations where I park in a garage. It has never turned on in my garage.I found if I turn on sentry mode when I’m in my garage, it doesn’t recognize that location as home and flashes like in a parking garage. I have to be away from home, then turn it on, then it works properly.
I have a similar or the same issue. 10 miles of range drop overnight. Sentry mode seems to trigger and flash headlights all night. I get between 150-350 events overnight. Wasn't an issue before. I have a 32 / 64gb USB thumb drive. Is that a factor? It only does this when parked at night at home. During the day sentry mode works normal and I get the usual 1-2 events. Help / suggestions anyone? Or is this a malfunction?
1 mph drain using sentry mode is normal. Remember that when using sentry, even if you don’t have triggers, it’s still recording so the number of triggers is irrelevant. But it is super sensitive. I park at the airport for four or five days every week and routinely have over 5,000 triggers when I return.Is 10 miles of range drop overnight with sentry mode on NOT normal for you? I remember it drains about 1 mile per hour regardless of how many events you got when sentry mode is on. Now I have no idea why you got so many events. Maybe you could check some of the clips and maybe see what triggered them. Hopefully not a rat!
I have a 500Gb hard drive attached for mine, half for music and the rest for SentryCam. Been working fine.I thought the dash cam (and Sentry) was limited to a 32gb USB or 32gb segmented on a larger USB? Does the 128gb work to allow full use of the drive now?
I lost 21 miles in about 18 hours. That comes to about 5kw power usage. Seems like a lot for cameras and a computer.