You can install our site as a web app on your iOS device by utilizing the Add to Home Screen feature in Safari. Please see this thread for more details on this.
Note: This feature may not be available in some browsers.
Hi Nick,H Compliance,
I figured this out also. By running it as python 3, modifying rc.local I got it working.
In addition I also got some code working to talk to my enphase system, and now I get actual house consumption (minus current charge) to work out total available amps. Worked great yesterday and today.
Hi Everyone,Hi Nick,
How did you connect to your Enphase System? They have changed the local authentication with a recent firmware update so I tried to get the Enlighten API to work but it does not seem to connect. I have set up the API keys etc.
Hi Everyone,
I just bought my tesla and the charger and I am trying to make it work with my Solar enphase System. I read most of the post but it is still unclear to me how to connect TWC manager to he Envoy stream. DOyou have a more dteailed git or post somewhere ?
This happens to me when charging 2017 LR Model 3, but not 2016 Model S. The only way to stop this has been to stop the charge from the app until the next morning. Have you had any luck fixing this since posting?So the 6amp charge plug for me starts for a min, then stops for a min, then starts for a min......... And this is a never ending cycle.
RIght now at dark I plug in the car and it starts charging at 6amps for a min. Then shuts off for a min then starts again.
Hi, I have indeed a Gen 3 TWC. Indeed all I read is about the Gen2. Few data available for gne 3 is only about monitoring. Does anyone has an idea where and how to dig for the Gen3 modalities for modulating charge current ? It is yer fully implemented in Gen 3 ? Any other thread for Gen 3?This thread is all about the GEN 2 HPWC... do you have a GEN 3 unit with wifi? I'm not sure there's anything for that one yet.
RS 485 can be used full duplex but it is quite often setup for half duplex operation.It says "half duplex", is RS485 normally full duplex?
TWC Manager starting as fake Master with id 7777 and sign 77
15:59:04: Send master linkready1
Tx@15:59:04: C0 FC E1 77 77 77 00 00 00 00 00 00 00 00 46 C0
Rx@15:59:04: (00 FC) FC E1 77 77 77 00 00 00 00 00 00 00 00 46
15:59:04 ERROR: TWC is set to Master mode so it can't be controlled by TWCManager. Search installation instruction PDF for 'rotary switch' and set switch so its arrow points to F on the dial.
15:59:04: Send master linkready2
Tx@15:59:04: C0 FB E2 77 77 77 00 00 00 00 00 00 00 00 47 C0
Rx@15:59:04: () FB E2 77 77 77 00 00 00 00 00 00 00 00 47
15:59:04: *** UNKNOWN MESSAGE FROM SLAVE:FB E2 77 77 77 00 00 00 00 00 00 00 00 47
Please private message user CDragon at http://teslamotorsclub.com with a copy of this error.
15:59:04: Send master linkready2
Tx@15:59:04: C0 FB E2 77 77 77 00 00 00 00 00 00 00 00 47 C0
Rx@15:59:05: () FD E2 99 32 5B 0C 80 00 00 00 00 00 00 00 00 94
15:59:05: 32.00 amp slave TWC 9932 is ready to link. Sign: 5B
15:59:05: Set slave TWC 9932 protocolVersion to 2, minAmpsTWCSupports to 6.
Tx@15:59:05: C0 FB E0 77 77 99 32 00 00 00 00 00 00 00 00 00 99 C0
Anyone knows more about this? I'm talking about this adapter: https://www.waveshare.com/w/upload/2/29/RS485-CAN-HAT-user-manuakl-en.pdfSay: should the above adapter work?
I'm afraid that's a specific adapter and if nobody is using it, you're out of luck on reviews.Anyone knows more about this? I'm talking about this adapter: https://www.waveshare.com/w/upload/2/29/RS485-CAN-HAT-user-manuakl-en.pdf
Or is there a way to directly contact "draconventions"? Is he a user here as well?
I think you are thinking of RS422.... RS422 has a transmitter on one pair and RX on the other pair. RS485 is semi-duplex (is that a word????) Multi drop and any device can acccess the line by checking to see if in use and asserting it. Usually there is a host that sends a query and that one device answers but multiple devices can "broadcast" a message at any time. Full duplex would mean that two stations could talk at the same time and tha'ts only true in RS422. cheers!RS 485 can be used full duplex but it is quite often setup for half duplex operation.