Vinyl cutout files for Model 3

[Marsnaut]

I'm surprised so many people have a vinyl cutter.

 

[AMIYY4YOU]

While I wait for material, I was experimenting with smaller stuff like the steering wheel tesla logo. Came out pretty good!

3M 1080 CF vinyl:

My alternative vinyl which I used for the center console:

 

[buddhra]

I'm surprised so many people have a vinyl cutter.

I don't, but my local makerspace does!

 

[Cringgen]

What software do you use for your cricut? I have one boxed away that I never touched due to it's lame software. Maybe it's time to open it back up.

The Cricut SW is cloud-based, so all the work is done online. My wife is an expert level user of both platforms and the Silhouette Cameo allows for much more customization.

 

[GregRF]

hmm - my software won't read ai files, it wants svg format, can anyone convert them.
I know later versions of ai format are supposed to be pdf, but these don't seem to be.

Same here. If anyone has a conversion to svg or dxf let me know.

 

[jtpassat]

who is willing to make a batch to sell to those of us without vinyl cutters?

 

[AMIYY4YOU]

who is willing to make a batch to sell to those of us without vinyl cutters?

I mentioned in my op that I will be cutting a bunch of cheaper vinyl material if you're interested! I'm asking for $15 for a set and hopefully will have some cut by the end of next week. Just let me know if you're interested!

Order for those with vinyl cutters I provide the files for free of course.

 

[jtpassat]

I can't read. I'll PM you.

I mentioned in my op that I will be cutting a bunch of cheaper vinyl material if you're interested! I'm asking for $15 for a set and hopefully will have some cut by the end of next week. Just let me know if you're interested!

Order for those with vinyl cutters I provide the files for free of course.

 

[GoKingsGo]

I would like the cut files too please!

 

[Luis3rD]

Please send it to me as well. Thank you!!!

 

[ebmcs03]

Do you plan to cut some glossy black vinyl too? If you get enough requests?

 

[xltread]

I'd really appreciate the cut files as well so I can try this on my wife's Silhouette Cameo machine with some 3M 1080 vinyl I bought.

Thank you for your hard work putting this together!

 

[steven415]

I've been working on cricut for the cup holder cuts. I can use vinyl and knife on the other trim pretty easy, but the cup holders are a bit more challenging for my current DIY skill level.

 

[AMIYY4YOU]

I've been working on cricut for the cup holder cuts. I can use vinyl and knife on the other trim pretty easy, but the cup holders are a bit more challenging for my current DIY skill level.

I allowed a little excess on the trim of the cups for my cut file and I think mine came out pretty well. I ended up using an exacto (and even my own nails) to trim perfectly on the creases.

Disclaimer: this is 3m 1080 and not the alternate vinyl material I plan to use. I wanted to see how both materials would fit

 

[lasdj]

I'm interested as well. Sent you a PM.

 

[anhnguyen]

...would love the center console and if handles, mirrors, and headlights available..

 

[ken830]

@AMIYY4YOU : I am interested in the cutout files too. Thanks!

 

[jrmnet]

Looks good on the console. Please add me to the list of those interested in the cutout files.

 

[viktorleon]

Same here. If anyone has a conversion to svg or dxf let me know.

@Twiglett and @GregRF - Still need help converting to svg or dxf? Please PM me.

 

[z3sty3]

i would also appreciate the cut files. thanks.