SucreTease
Teslarian
I have available an unused Camera Switcher kit + camera + Panda/Giraffe kit that I never installed. Please send me a private message if interested.
You can install our site as a web app on your iOS device by utilizing the Add to Home Screen feature in Safari. Please see this thread for more details on this.
Note: This feature may not be available in some browsers.
just posted an unused camera switcher kit + 360 kit.
Good intentions: Unused Camera Switcher and 360-kit for Model S[/QUOTEin
Hi all, soon I will be installing a front camera kit I purchased from a member - Thanks David!
I would appreciate from other members that installed this on a AP1 car.
1) Everything is done through the drivers side on the AP1 right? no need to dismantle glovebox ect. like shown in the video by appleguru for his AP2?
2) To activate the camera switch you click and hold the right scroll wheel on the steering wheel - right? (no programming is needed for this function?)
Thanks guys!
That is true if it is a MS. Not true for an MX. You have to do something similar to AP2 for the AP1 MX. I posted details way back in the thread.I would appreciate from other members that installed this on a AP1 car.
So where is this "hdmi switcher" you referenced? Do you happen to have any links or more info on it? I'm now looking for the actual hardware for doing all this now. Have to start with the Tesla parts, then do the other secondarily.
2017 Model S, AP2.0
There is this camera that is less expensive than the Flir but made for night driving and animal/ped identification: Night Owl Plus Infrared Deer Detector for CarOK, after some more thought and searching, this might be feasible and reasonable too.
Thermal Cameras for your Smartphone with a Raspberry Pi using OpenThermal/libseek-thermal and with the viewer app to have the output going to HDMI.
So that makes it roughly $250 to $500 depending on resolution. So this *is* actually possible in theory for a reasonable amount...
So where is this "hdmi switcher" you referenced? Do you happen to have any links or more info on it? I'm now looking for the actual hardware for doing all this now. Have to start with the Tesla parts, then do the other secondarily.
2017 Model S, AP2.0