Aftermarket Wheels on Model 3

[CrewKize]

Got a nail in sidewall so yep ordered wheels
Have some Tsw 19x9 +30 gonna run 245 40 19 for a P3D. Did I mess up on the offset. Wanted it to fit flush with out the poke. Will these work ?

View attachment 413121 View attachment 413124
VS Forged VS16 19x9+35mm brushed bronze, PS4S 255/40/19. Aka street shoes.

View attachment 413128
View attachment 413127
Dually mode, aka track mode.
Fast Wheels FC04 19x9.3+35mm dark bronze, RE71R 265/35/19.

 

[DNAPoPo]

Got a nail in sidewall so yep ordered wheels
Have some Tsw 19x9 +30 gonna run 245 40 19 for a P3D. Did I mess up on the offset. Wanted it to fit flush with out the poke. Will these work ?

Will not poke at all, I posted pics a few posts ago, my current setup also runs the same fitment up front.

 

[beastmode13]

Got a nail in sidewall so yep ordered wheels
Have some Tsw 19x9 +30 gonna run 245 40 19 for a P3D. Did I mess up on the offset. Wanted it to fit flush with out the poke. Will these work ?

It’s going to stick out 10mm more so than stock setup. 5mm from the offset, 5mm from the 10mm wider treads. It might be flush, it might be poky, really depends on the tires. When in doubt it’s safer to go with wheel with more offset then dial it out with spacers.

 

[SD_Engnr]

Got a nail in sidewall so yep ordered wheels
Have some Tsw 19x9 +30 gonna run 245 40 19 for a P3D. Did I mess up on the offset. Wanted it to fit flush with out the poke. Will these work ?

There's a lot of information contained within this thread should help you determine whether or not it will poke, or be sunken in.

FYI, I am running 9.5" +34 for daily, or +35 for track. I am lowered, and there is zero poke. When not lowered, there was slight poke up front. Your setup of 9" + 30 will be 2mm more inward, so the poke would be even less than the minimal poke I had.

 

[CrewKize]

Thanks guys, Yea MPP coilovers are on the work bench just waiting for the shims and should be good to go soon.

 

[M3forME#23]

Will these specs work? or to aggressive?
pls advice... thanxs in advance

 

[DNAPoPo]

Will these specs work? or to aggressive?
pls advice... thanxs in advance

it's pretty aggressive, but will work, depends on the look you want, Infinite Auto Design did this on a car a while back...

 

[Daniel in SD]

Will these specs work? or to aggressive?
pls advice... thanxs in advance

I wouldn't do less than 35mm offset in the front with 9.5" rims. It will stick out. This is 9.5" ET39 (265/40R18) at stock height.

 

[M3forME#23]

I just want fender flush.... i dont like it when it sticks out, id rather have it sunk a little...

 

[juanmedina]

Will these specs work? or to aggressive?
pls advice... thanxs in advance

You mean this:

'

it seems that the wheels stick out with those specs

 

[M3forME#23]

You mean this:

'

it seems that the wheels stick out with those specs

yup looks like it...

 

[Daskid]

You mean this:

'

it seems that the wheels stick out with those specs

That lip! Which lip spoiler is that?

 

[juanmedina]

That lip! Which lip spoiler is that?

no idea that picture is from the Koning website

 

[DNAPoPo]

no idea that picture is from the Koning website

Infinite Auto Design

 

[juanmedina]

Infinite Auto Design

.

Wow it looks good

 

[i1overice]

View attachment 431331 View attachment 431332 View attachment 431333 View attachment 431334 I waited about half a year for these once I first heard of this design being created. So glad I did. I think it looks great. I wish I was braver to go matte bronze but this looks even better and its subtle. I'm the first to rock this style from VMR.

I had my fun with the 18s and I didnt want to go 20s on my Performance 3D. So I went 19x8.5 and 19x9.5 in rear. Pretty flush in back with et35 all around. Also dropped on unplugged springs. Me likey!!

What tires did you put on these?

I am planning on getting the exact same set except in Matte Bronze.

I was going to do square at 19x9.5 et 35.

 

[Daskid]

.

Wow it looks good


View attachment 439154

Do you know if this is the 19x9.5 +25 front and 19x10.5 +23 rear setup?

 

[P-Lo801]

That lip! Which lip spoiler is that?

It's by Infinite Auto Design. Their website is under construction, but you can view their IG page here: Infinite Auto Design (@infiniteautodesign) • Instagram photos and videos

 

[HMRSKima]

Hey all! Been waiting to post this since test fitting at König (Fontana warehouse) a while ago and promise better pics are coming after a few more mods. Infinite beat me to it, but I’ll claim first MSM!

We opted for 19x8.5F ET30 / 19x9.5R ET35 specifically because I didn’t want poke lowered or have any issues with full passenger rears (gotta keep it civil for the relatives). Stancemagic rings for the 64.1-> 73.1, no spacers. Tires are Falken FK510s 245/40/19F, 265/35/19R.

Absolutely in love with how this looks and complements the UP Super Performance Spring drop .

 

[HMRSKima]

Hey all! Been waiting to post this since test fitting at König (Fontana warehouse) a while ago and promise better pics are coming after a few more mods. Infinite beat me to it, but I’ll claim first MSM!

We opted for 19x8.5F ET30 / 19x9.5R ET35 specifically because I didn’t want poke lowered or have any issues with full passenger rears (gotta keep it civil for the relatives). Stancemagic rings for the 64.1-> 73.1, no spacers. Tires are Falken FK510s 245/40/19F, 265/35/19R.

Absolutely in love with how this looks and complements the UP Super Performance Spring drop .

Forgot to attach these to help describe the offset choice .