Same 19x9.5+22 with 275/35R19 setup, but now -4 on the offset up front with my new aftermarket rotors.
From a fitment standpoint, I used to be able to get away with ~2 degrees front camber, but it rubs pretty regularly now at that setting on the thicker rotors hats. It has rubbed once so far while turning (somewhere on the front or rear of the fender well), but it has also rubbed few times now at the top of the fender over larger bumps. I am going to try 2.5 degrees next, but 2.5 on each end is probably not great for a daily car (for tire wear).
View attachment 846090