We've noticed that our entire dashboard (black with wood strip) seems to be mounted off center. On the left side there's about a 3/8" gap between the side of the dash and the door panel but on the right side the dashboard (actually the little metal strip by the wood) is causing an indentation into the door panel surface and it's thus slightly beyond flush mounted.
Seeing as how it's a vastly different piece than in normal cars (i.e. there are no buttons, wires, etc) is it a matter of just loosening a few screws and moving it over or a much bigger service item? I know I could complain and have them fix it but if it's easy to do I'm fine with doing it myself to save myself the time of the service visit.
Seeing as how it's a vastly different piece than in normal cars (i.e. there are no buttons, wires, etc) is it a matter of just loosening a few screws and moving it over or a much bigger service item? I know I could complain and have them fix it but if it's easy to do I'm fine with doing it myself to save myself the time of the service visit.