I'm currently having an issue on my Model X, Dec 2017 build with 25k miles. There is an awful haze that just will not come off no matter what we try.
I have two distinct and different problem areas. One is the edges all the way around. This looks like a pattern from where the windshield was sealed and placed and is more defined. The second is much more broad and covers most of the surface of the windshield and all the way up to the top. On this you can see uniform crosshatched lines, like roller marks. Both these areas have similar properties of appearing to be within the glass itself. It's not a fog that fluctuates with temp or humidity changes. It's equally bad all the time and looks downright ridiculous in the right sunlight.
At first glance it appears to be on the outer surface. Wetting and cleaning looks like it will help at first as it masks the haze momentarily. But it inevitably comes right back after a few seconds and looks exactly the same. Same pattern, same stipple marks even. No amount of scrubbing, cleaning, or scraping has any effect. It's as if the issue is IN the glass.
Tesla Service Center says it's not defective and won't cover under warranty, that it would require a $1600 out of pocket replacement. I strongly believe it's defective.
Their "best detail guy" tried steel wool and some chemicals with no results. Said there's nothing they can do. They believe it came from some kind of windshield cover or something that was held in place by adhesive, which sounds pretty ridiculous to me. I did buy the car with 11k miles, so I cannot vouch for what may or may not have happened at the beginning of its life. But if it were adhesive residue, then by nature it would be affixed to the surface. In that case it should be able to be manipulated, wiped off, scraped off, something. This is not that. It literally feels like there is nothing there.
I then took it back to the place that did my ceramic coat. They said they've never seen anything like it and it's definitely not a result of the ceramic coat. They tried a clay bar, glass polish, and a buffer with no results.
My best guess is that these are from some sort of vapor or gas that has somehow collected inside the glass. The issue on the edges looks like a vapor that originated with a sealant or adhesive bead. I have no idea where the rest of the haze could have originated.
I'm at a loss here and have better things to spend $1600 on than a stupid defective windshield. Does anyone have any idea what this could be or what could be causing it? Or who to talk to at Tesla that could make a more reasonable decision?
I have two distinct and different problem areas. One is the edges all the way around. This looks like a pattern from where the windshield was sealed and placed and is more defined. The second is much more broad and covers most of the surface of the windshield and all the way up to the top. On this you can see uniform crosshatched lines, like roller marks. Both these areas have similar properties of appearing to be within the glass itself. It's not a fog that fluctuates with temp or humidity changes. It's equally bad all the time and looks downright ridiculous in the right sunlight.
At first glance it appears to be on the outer surface. Wetting and cleaning looks like it will help at first as it masks the haze momentarily. But it inevitably comes right back after a few seconds and looks exactly the same. Same pattern, same stipple marks even. No amount of scrubbing, cleaning, or scraping has any effect. It's as if the issue is IN the glass.
Tesla Service Center says it's not defective and won't cover under warranty, that it would require a $1600 out of pocket replacement. I strongly believe it's defective.
Their "best detail guy" tried steel wool and some chemicals with no results. Said there's nothing they can do. They believe it came from some kind of windshield cover or something that was held in place by adhesive, which sounds pretty ridiculous to me. I did buy the car with 11k miles, so I cannot vouch for what may or may not have happened at the beginning of its life. But if it were adhesive residue, then by nature it would be affixed to the surface. In that case it should be able to be manipulated, wiped off, scraped off, something. This is not that. It literally feels like there is nothing there.
I then took it back to the place that did my ceramic coat. They said they've never seen anything like it and it's definitely not a result of the ceramic coat. They tried a clay bar, glass polish, and a buffer with no results.
My best guess is that these are from some sort of vapor or gas that has somehow collected inside the glass. The issue on the edges looks like a vapor that originated with a sealant or adhesive bead. I have no idea where the rest of the haze could have originated.
I'm at a loss here and have better things to spend $1600 on than a stupid defective windshield. Does anyone have any idea what this could be or what could be causing it? Or who to talk to at Tesla that could make a more reasonable decision?