IGNORE my previous post!
So....this is doing my head in. This morning I tested each wire on the left headlamp (refresh/face lift with LED lights). There are 9 wires in the harness/plug but only 6 pins in the socket (see photos attached). The only thing I figured out was the turn signal. I can't work out the DRL, headlamp, or high beam. None of these voltages changed with with the high beam. I didn't test voltages on the right as I was staring to get a little frustrated and decided it would be better to ask for help than compromise any more wire insulation.
For the LEFT side:
1 - Red/White..........+7.8V
2 - Purple/White......+11.1V to +12.1V (when car powered up)
3 - Red/Pink............0
4 - Grey...................+12V turn signal
5 - Red....................0
6 - Red/Black...........+12V (?switched)
7 - Brown.................+12V constant
8 - Black...................Earth
9 - Black...................Earth
For the RIGHT side:
1 - Red/Pink
2- White/Black
3 - Blue/White
4 - Green
5 - Brown
6 - Red/Grey
7 - Purple
8 - Black
9 - Black
Any help/advice on how to find the high beam would be helpful.
This is the plug model number: DJ7141-1.5/3.5-21
Marty
View attachment 188898 View attachment 188899 View attachment 188900 View attachment 188901