-
Want to remove ads? Register an account and login to see fewer ads, and become a Supporting Member to remove almost all ads.
Show off your aftermarket Model X wheels...
- Thread starter wildTING
- Start date
Yoitskenn
Member
Can someone post a pic of 22" wheels on "very low" suspension.
I am trying to determine if the gap is sufficient or...........get Unplugged brackets.
I see a lot of pics of nicely stanced car, but there is no mention if it has lowering brackets or stock.
I am trying to determine if the gap is sufficient or...........get Unplugged brackets.
I see a lot of pics of nicely stanced car, but there is no mention if it has lowering brackets or stock.
Yoitskenn
Member
What setting are you on? My guess is "very low"HRE RS204M's
Or is it on llowering brackets?
Yoitskenn
Member
Can anyone point me in the right direction to but 22" Black OEM wheels for Model X for a good price?
Midnight Silver Metallic Tesla Model X with Space Gray 20" TSS Flow Forged Wheels
- Size: 20x9.0" Front, 20x10" Rear
- Offset: +35 Front, +40 Rear
- Bolt Pattern (PCD): 5x120
- Center Bore: 64.1
- Weight: 20x9.0": 29.7 lbs; 20x10": 30.45 lbs
- Load Rating: 900 kg/1,980 lbs
- Tire Size: 20x9.0": 265/45-20; 20x10": 275/45-20
22x10 up front will rub/ may not fit no matter what offset you put. I have 22x9.5 28mm offset with 285/35/22 and the have 1/4 in clearance to the control arm and the very lightly rub when reversing under full turns. At all heights
I have a set of BC Forged mono block for model X
22x9 et 25 (25.2 lbs)
22x10 et 25. (26.5 lbs)
Dark brushed finished
$4200 retail
slightly used 6 weeks
$2500 + shipping
selling because I want a more aggressive set up
22x10
22x11
PM me if you have any questions
nixnexus
Member
I've got the 22x10 & 22x11 setup.
It rubs the liner slightly at full lock turns when reversing harshly in the very low setting (on links). Not really a problem. Not sure what the offsets are - they were custom made for the Model X.
It rubs the liner slightly at full lock turns when reversing harshly in the very low setting (on links). Not really a problem. Not sure what the offsets are - they were custom made for the Model X.
Yoitskenn
Member
nixnexus
Member
Attached. Concavity FTW.
View media item 120888View media item 120892View media item 120891View media item 120890
View media item 120888View media item 120892View media item 120891View media item 120890
Attachments
Last edited:
nixnexus
Member
Yoitskenn
Member
22x9 +20
22x10.5 +38
Wheels weight about 31lbs
Still getting used to the look. Might end up lowering it in Unplugged brackets since I can’t keep it on “very low” mode. Wheel gap is still too large for my taste.
XPEL Stealth Protected Performance Model X with Gloss Black 22" TSS Flow Forged Wheels
- Size: 22x9.0" Front, 22x10" Rear
- Offset: +35 Front, +35 Rear
- Bolt Pattern (PCD): 5x120
- Center Bore: 64.1
- Weight: 22x9.0": 32.1 lbs; 22x10": 34.3 lbs
- Load Rating: 900 kg/1,980 lbs
- Tire Size: 265/35-22 front; 22x10": 255/35-22 Pirelli Factory Tire
Yoitskenn
Member
Decided to put these on my wife’s car and I think it looks better on the white than it did the grey
Similar threads
