Supercharger tapering visualized
[/QUOTE]
@dirkhh, this is great! I was just going to post a request for supercharging data from the datalogging experts like you, in order to solve a problem (or feature) I'm experiencing. I was wondering if you could plot (in a single plot), charging power (kW) vs SOC (%). In another thread you were asking about what is useful to plot -- here is my vote. I see in your later post the data may be there but in two plots.
The reason, FYI, is that I live and charge at top of 3000-ft. mountain and commute to sea level, sometimes ending up with more charge than I started with on my outgoing leg. I would like to get full regen on the downhill commute and not need the brakes, but starting with software 4.5, I noticed that my regen is limited when my charge level is around even 90% (in older software I could charge to "standard" 93% and not have a problem, i.e. use regen to 60kW as long as I wasn't near 100%). I've been experimenting with charging less and less to see what the threshold is that I can still get full regen during my commute. Therefore it would be very useful to see, e.g., what is the SOC when the supercharge rate drops below 60kW (the max regen level), and the entire taper.
There is a complication that I have an 85kWh battery but this would be an excellent start. I did a supercharge as a test to 100% but wasn't set up at the time to log it. Thanks!