You can install our site as a web app on your iOS device by utilizing the Add to Home Screen feature in Safari. Please see this thread for more details on this.
Note: This feature may not be available in some browsers.
A full factory reset of Model S din't resolve the issue - still TPMS warning message.
Will drive a longer distance this afternoon, maybe it will work after the drive?
I also have a 2013 model S that I can no longer reset the TPMS sensors after the update. Tesla wants $1,000 to fix an issue that wasn't an issue before there update.
Regarding the Traction Control Disabled, Stability control disabled and Regenerative braking disabled messages also present alongside the TPMS system fault, the vehicle will need to come into the service center for diagnosis and repairs of all faults present."
My advice is to try a few reboots of the 17" screen, in case that clears up the error on your car; if that fails, telephone Tesla Support and get them to push a full software update to your car. That should then clear up these errors without your need to visit a service centre (unless you are determined to purchase new sensors from them).
$53 for what took the tech 15 seconds to reset is a rip off when it used to be DIY and free
I have heard this may be planned on a future release. crossing fingers...That's really poor service! We need to demand better (but Tesla service these days is so lousy, that isn't going to be easy). Maybe if enough users file bug reports against v.10, maybe we'll get our reset button back again?
I have heard this may be planned on a future release. crossing fingers
Do you happen to know which "program" was written to sensors? I had a local tire shop install CUB sensors and do the ID cloning but sensor signals are not picked up by the car. We have tried two different sensor programs, have generated new IDs and copied old ones to new sensors but it doesn't seem to help. Tire pressures were dropped to zero before programming the sensors.Tried new sensors from Cub, programmed with Cub SensorAid Programmer - it works
Copied the IDs from summer to winter tires with Cub sensors, Autel MX Sensors didn't work.