Search results

No joy, It just kept trying to open, and flexing the hood slightly obviously not good for the struts or the hood.

I should have mentioned I did update the firmware about a month ago,

Well add me to the list. I did update my firmware about a month ago so not sure if it was a contributing factor or not. Anyway, Wife calls says frunk wont close, and car is giving the error message. So I come look at it, I had to manually push it shut, We get it home and after some...

So I installed the EVOffer power frunk back in November of 22. I probably have used it 20 or 30 times since then. Well last week the wife calls and says the frunk won't lock down and the car is saying its not closed. When she pushes the frunk release it makes a noise but nothing happens. So...

Is that a medium or a intermediate as I don't see the side door option available for mediums just the intermediated I'm guessing my 40 lb aussie would need a medium and not an intermediate, but that side entrance is nice in the Y

Yes still for sale

bump

Same issue on my 22 Y Left the garage at 58 Degrees drove for 20 minutes before it dropped down to 24. Does not seem correct. Hell my 14 Chevy Cruze adjusts in seconds.

Bump

abstract ocean has a rear kit that taps into the front ambient lighting no wires to cut or splice takes about 30 minutes to install.

Old Style it is a USA wheel.

Appreciate it. Cabin takes like 2 minutes to heat up if you precondition. I was just curious if it made any real world difference going from the garage to sub freezing.

Hello, Have a question and my google fu could be week or I just could not find the answer. Here is my question. This is our first winter with the car. Its in an insulated garage kept Usually around 45-60* When its below freezing out side. Is there any benefit to preconditioning before...

This is for a 3 or Y, The airbag release holes are closer to the 4 and 8 o'clock position on the wheel. In the picture they would be right above the Black Allen screws. If that makes sense.

bump...... Sunshade is sold

we have FSD, Well not yet but we have EAP

No luck with any vendor yet either.

So I installed the Evan offer automatic Frunk adjusted the height of the latch. To me, it seems the middle of the front sticks up slightly. Which may catch air or stone chips on the leading edge what do you guys think? Should I lower it slightly more?

Like others have stated, the right side has changed. It is more rounded. I just sold my bins to a guy that had a 22 early model and his is more pointy. They did not fit my 22 Austin build.

Thanks, I get the misinterpretation of lights, but this is in the middle of a two lane road with nothing nearby. So I guess its using some type of previous mapping info?

Quick question on a stretch of 2 Lane Rd. that was under construction for about five months. They put in a temporary red light. It’s been gone for about five months now we just got our car. When driving down this road with auto pilot on it wants to stop because it thinks there’s a stoplight...

Have a few things that thought I was going to use but ended up missing the return window and my loss is your gain. All new never used. RPM Tesla matte black canards Model Y 40.00 Shipped RPM Tesla Real matte carbon Shift/turn signal covers 3/Y (went with red) 65.00 Shipped Covercraft...

Price Reduction 650.00 Shipped

Quick question. Just got our Y about 2 weeks ago just barely over a 1k miles Safety score 98, Just did 700 mile road trip 675 all on Auto pilot. I know no one knows when you get beta. My question is my wifes co worker who has the subscription and FSD said because she is on the most...

yep i have a rattle in the back as well. Might have to ride in the back too

Wife has the same complaint. Any issues crop up over time by doing this. Seems to be about the only fix for this complaint

Happy to report everything was addressed and fixed except the a pillar glob of silicone. They were going to repaint it, but then again they have to blend 18 inches they said, so I elected to have it touched up instead of sanded and painted. It’s going to be wrapped in black vinyl anyway but as...

A129xx NO Matrix

I ordered this for the wife's car and she does not care for it so my loss is your gain. It is absolutely beautiful Brand New from Haanshow Never Installed. Full Specs. Tesla Factory Heated wheel, 100% all real Matte Carbon, With Matte Carbon inserts. Black Nappa Leather Inserts...

No it does not randomly freezes its at Tesla now getting all my delivery day issues addressed along with the touch screen.

My Austin build. 20 Sept Build had some issues. Car is currently at Tesla addressing the issues we had noted at pickup. 1. Inside was flawless. 2. We do have the buffeting sound people complain about, and a rattle sound when going over bumps. (our 20 Y loaner does not have this) I'm...

No to both of those

So we just picked up our Y. I am having issues with the touch screen being unresponsive to touch. I put in a service request and wanted to make sure it was an issue. So I can touch the car icon on the bottom left multiple times and nothing happens or I will be in navigation and I cant...

Picked up ours yesterday Bloomington. Austin build 121XX white on black 19" New Door trim panels. Non Matrix, Non magnetic center console, Trunk Tray. I would give it a B on Fit and finish. Interior was flawless, and I went over it looking for grease blems etc. Now the Bad. Frunk...

A few questions for home link users. I know you can set it to automatically open and close when you pull up or drive away. My question is when it’s in automatic mode and you pull up to the house and the door is already open does it then send the signal to the door and it will close? Also...

The new door trim on the inside of the car.

Hopefully I'm in the right spot. Had a question for you guys. Due to pick up our Y Next week. So I'm grandfathered on the FSD price and currently have EAP on the Car. If I decided not to pick up FSD at time of purchase do you know if my grandfathered price is still available or does it...

Just got our VIN A0121XX EDD was end of October-beginning of November I'm looking like I am just on the edge of New Door Panels or not.

Just got my vin A121** White LR wonder if it has new doors or not.

I know this is sold what part was heated the whole wheel or just the leather.

Still trying to figure out the edd stuff. Yes I CX a vin in the beginning of June. But My new EDD date then became beginning of July, middle of July end of July beginning of Aug, middle of Aug, Then End of Sept, Then the first week of sept, and now the end of the year, Scratch that just...

Congrats I woke up to my EDD slipping to 17 NOV - December 29 From June of this year originally

So here is my Story, White/ Black interior LR w/Towing. 19" EDD was July 22 something Then it bumped to June 1st. Then I got a Vin but wanted to push it until July 1 for the rebate. So our SA rejected the VIN for us, then 6 hours later, we got another Vin then Rejected that one around...

If you see light coming through, then it needs to be addressed if it bothers you.

Is it quieter in the cabin, Some people think is seems quieter which would make sense if it was.

There are a few people reporting delivery of this configuration, Its going to depend on your VIN from what I understand well at least production date

Does your wood trim wrap to the doors? If not its the Normal trim, The model 3 got the wrap around trim last year and the foreign Y's have had it since production. Supposedly new Y's are starting to show up with it.

Did your have the new/ Old Door trim Heard some of the people taking delivery this past week have the new interior pieces

So I'm looking to pick up a matt black splitter and a carbon fiber spoiler. It seems almost everybody is just a rebranded Chinese copy. With that being said anybody have any links to something that worked good for you and has held up. Thanks RS

I did check that out after I read about the must be picked up in IL line.