Search results

I took CyberTruck to the race track! Check it out here on youtube

Hey wondering if you got the solution to this problem?

Hi guys! Just found this thread and wanted to chime in on my experience. Plaid absolutely needs a reliable brake upgrade. Especially if you're running the track. The UP Plaid I set the BRP EV record with has CC BBK. I'm pretty sure that kit is available now. I can attest to the reliability and...

Funny that is one of the most important things an alignment shop should do. That and make sure everything is tightened up afterward.

For the record, the UP PP car weighed in at 3999lbs with randy in it. I would say an estimate of 600-700lbs of OE components were removed but the full cage and other misc items brought the curb weight back up. All windows are also lexan except the back window.

I track 3-4 times a month and tune my alignment monthly. I'll even make minor adjustments myself with toe plates. Just wanted to boost your confidence in knowing that just about any alignment shop can perform service on your car. Sure, there is a slight risk. I would say you're more than likely...

I need one of these as a support van for my racing!

I don't have any MPP parts on my car but I can imagine a BMCB could help. How much of a benefit is in question. I'm certainly not against it.

I'm very down. lol Instagram - Craig Coker

haha yeah, they aren't ski googles though. Goofy for sure but that's why I like them.

Surely. I'm pretty damn happy with my setup. Coupled with a good tire I have incredible stopping power without blasting through sets of pads every couple of track days. I have the front big brake kit to thank for that. - Front BFB kit by Unplugged Performance. Carbon 395mm rotors with 6 piston...

If you look at in that perspective the name fits. There are people coming from around the world to drive at GTA. Canada, Australia, UK, Japan, and parts of Europe.

Thanks Mash! I would say the combination of driver, grip, and software hack got that well-deserved 1:52.8. Dai is a professional driver who has a lot of seat time at Buttonwillow. Here's the main difference in cars: Dai's Car: Aero: Large Wing, Front Splitter and Side Skirts Tires: Advan...

Yeah, I really don't know their reasoning behind the name. I'm just a driver in the event. lol

ya know, I am not sure about that. but you do make a valid point. Perhaps they plan to expand.

Happy to report my 2nd place podium at Global Time Attack at Buttonwillow. I competed in Enthusiast class which limited my setup but was still a great challenge. My tires were one of the biggest limiting factors. I was restricted to 255 with a minimum 220 tread wear. I also needed to include all...

Congrats on the PB! I've had my eye on VIR for a tour I'm working on. Superchargers seem to be pretty far from the track. Do they have 50amps available or you have different solution? Do you use Assetto Corsa VIR? I hear the track design is pretty good. By the way, Great tire selection btw. I...

Yeah, it's pretty impressive. There are only about 10/80+ Teslas I know in sub 2. They are all 3's except this Y.

Thanks! Gopro Hero 9. although I think it does too good of job stabilizing sometimes. Perhaps I need to turn off camera stabilization to promote the true experience I'm going through. I'm also thinking of mounting a helmet cam.

The 3 all day. Smaller and much more capable!

Proud to announce another track record! I'm stoked how the car is handling and looking forward to my next track event in two weeks at Buttonwillow.

Thank you! One thing I want to note on Y speed displayed on screen. It is not precise because it's not taking into account for the smaller UP 18" race wheels. I estimate about 6mph slower than what it actually shows.

Maybe look into replacing the OEM spring with an Unplugged mild spring. This is proven for a softer ride. Also a cheaper alternative to coilovers. It's VERY unlikely Tesla will void your warranty over springs. To give you some perspective, my car is modded from head to toe and looks like a race...

I tracked the 3 and Y in one 15min session. The way the Buttonwillow track is configured you have to do a minimum of 3 complete runs to get a hot lap in (out lap, hot lap, cool down). Everything worked out and I managed to get the SUV lap record and a PB in my 3 all in the same session. Later...

18x10.5 I do not have the exact offset as unplugged made it a custom set. If I were to guess I would say ET30

Thanks, They only have 50amp RV outlets. I go to supercharge midday. It's 30mins away though. Really wish tesla would put one closer!

Yeah I was definitely limited at this point. 4th lap in on a 2.5mile track. Unplugged has really incredible cooling solutions they are developing. Can’t wait for them to release those products!

They are not out yet. Soon though!

Given that I do have a heavily modded P3D with Unplugged suspension, BFB brake kit, track wheels with 315's, etc.. ). I think I could hang with a GT3 RS. I have found myself tracking with these guys on multiple occasions. Turns seem to be no issue and I can actually put pressure on them. The...

The modded front fenders and the camber are what gets those 315's to fit. Ride height is 26.5 inches measured from ground to middle of the finder.

+1 on the UP arms! I run them and have great results with -3.5. Also running UP 18x10.5 on 315's

It is great seeing more people get involved. I like how you're not pushin too hard and getting comfortable with the car. Definitely the best way to do it. I installed parts in increments so I can understand every upgrade and know the difference of feel. It's really helped my knowledge of the...

That's a huge upgrade list from stock! I have no doubt you will get better times! Looking forward to seeing your results.

Thank you for your input. I am very aware of the threshold and pre-conditioning process. This time attack start line was 1.5 miles in at phil hill. I know I pushed a little too hard prior to start but I also know I didnt loose much time. Power felt consitant and speed was on par throuout the...

Yeah, I did a half lap warm up prior to my run. I may have pushed a little too hard.

Yeah had no problem in the rear. Camber is -2.7 rear, -3.5 front.

Yeah with spacers too! The rear is no problem. The front is the issue. You must relocate the speed sensor wire, add a wheel spacer so the trires dont hit the upright, and run modified fenders so there are no tire contact issues.

I recently ran Buttonwillow for a personal best at 1:57.3. That was the last session of the day! I'm a close second to the Tesla street record by 1.5secs. I'll have another go in December at Tesla Corsa with more upgrades to come! My car setup: 2018 Tesla Model 3 Performance on Track Mode v2...

You are correct. They are required to be open at this track event.

True true, I donno, but people keep calling Y an SUV so I just went with it I guess.

agreed! I forgot all my mounts and had to use someone else's :(

Hi Guys, I just wanted to chime in. I'm on the new update 2020.36.10 with Ohmmu. I did get a message showing that the battery needs to be replaced but the great news is it no longer shows the repeated annoying message on the left where it use to always reside. To me, this is manageable. The...

This Y is a BEAST!

2018 Model 3 performance with free unlimited supercharging.

I'm just about to hit 45,000 miles. I Supercharge 95% of the time and to 100% SOC all the time. I've never felt Tesla intentionally throttle me. In fact, I just hit 250kv at an SC yesterday.

Here is the list of my current mods: 2018 Tesla Model 3 Performance with Track Mode v2 - UP Steel braided brake lines Stainless Steel Sport Brake Line Set for Tesla Model 3 - UP Track Pads Unplugged Competition Brake Pads for Tesla Model 3 Performance - Motul 660 High Temp Brake Fluid - UP Dual...

I went to Laguna Seca last year with my stock P3D. It was an incredible experience driving on a world-renowned track. Now I'm going back this weekend ( Aug 15-16 ) with my track ready P3D! Come on out and get on the track yourself! I would love to see you there ( with your masks ;)!

Yes, "Navigate to the nearest race track". Which rims? #becauseracecar or #becausewifeisincar?

Yes, I must get to the store as quickly as possible for my mike and cereal. lol I'm actually a fan of this seat over the plaid. Goes well with my white interior too.

I've got an addiction to this sport and I'm not stopping anytime soon! Here's the latest 360 video of a single hot lap I did at TC9. Let me know what you think and feel free to ask any questions about my car or driving. Desktop users: Click and drag on the video to change views Mobile users...