2021 Model S LR: Christmas Tree of Errors

[McL0vin]

Refreshed Model S owner here. Got in the car and tons of errors/alerts: Adaptive Ride control degraded, steering assist reduced, regenerative breaking disabled, traction control disabled, and stability control disabled.

Anyone else experience this with 2021/2022 MS and was the outcome? I have seen some similar issues mentioned on older MS or a thread with some Plaid MS(s). Tesla roadside called tow truck as all reset methods failed to clear any errors. The car has 1.5k miles. I also had thumping issue in certain corners but Tesla Support said this was deemed normal due to 21inch wheels with summer tires and would not cause any damage.

Thanks for your time in advance!

 

[Mash]

Probably cable damage by tire. Should be easy to fix warranty case if you used stock wheels.

 

[McQ14]

I think @Mash is on to the correct issue here. This subject came up in this thread from @rhuber recently.

I've linked the first post about it and the description, with photos and the discussion which follows that post. Good luck!

 

[rhuber]

It is possible it is the same as mine, but there are more errors than I experienced. If you want to check for the problem I had, here's a bit more info as well: 2021+ Model S and Model S Plaid Refresh Issues Thread

 

[McL0vin]

Probably cable damage by tire. Should be easy to fix warranty case if you used stock wheels.

Everything is stock on the car! Hoping this is the issue then…service has been closed past two days and service just opened today. If I hear anything will update with cause.

 

[McL0vin]

It is possible it is the same as mine, but there are more errors than I experienced. If you want to check for the problem I had, here's a bit more info as well: 2021+ Model S and Model S Plaid Refresh Issues Thread

I’ll take a look thank you!

 

[McL0vin]

Quick update! Car has been fixed and have posted services comments on the issues.

 

[rhuber]

I would still encourage you to stick a smartphone in the wheel well and take a photo to confirm, just to be sure. My car also worked fine after a couple of resets, until it didn't.

 

[McL0vin]

I would still encourage you to stick a smartphone in the wheel well and take a photo to confirm, just to be sure. My car also worked fine after a couple of resets, until it didn't.

I will take a look still! Going to pickup car now. I will look at angles you did in photos.