CrazyCoconut
Member
So 99-A is actually thinner? I have 00-A right now.@CrazyCoconut
1455166-99-A => M3 Rear Spoiler, Carbon, Prototype
1455166-00-A => M3 Rear Spoiler, Carbon
The one attached to the car is 00-A
You can install our site as a web app on your iOS device by utilizing the Add to Home Screen feature in Safari. Please see this thread for more details on this.
Note: This feature may not be available in some browsers.
So 99-A is actually thinner? I have 00-A right now.@CrazyCoconut
1455166-99-A => M3 Rear Spoiler, Carbon, Prototype
1455166-00-A => M3 Rear Spoiler, Carbon
The one attached to the car is 00-A
To each their own, but the badge is going to look out of place on that GT350.Spoiler install went pretty good - it was the 1455166-00-A . Ranger came and had the jig to use to align it. He said he had done more than 10 before this one. He also was nice enough to give me the dual motor performance badge - and agreed that I could paint or plasti-dip it and then they'd stop by and install it (he had a jig for that also).
Here's a couple pics
View attachment 395444 View attachment 395445
Seems like there's a small gap at the end? Any gaps in the middle? Hard to tell from the picture.Spoiler install went pretty good - it was the 1455166-00-A . Ranger came and had the jig to use to align it. He said he had done more than 10 before this one. He also was nice enough to give me the dual motor performance badge - and agreed that I could paint or plasti-dip it and then they'd stop by and install it (he had a jig for that also).
Here's a couple pics
View attachment 395444 View attachment 395445
View attachment 395576 One side is flush and this is the other. Not sure if it’s worth fussing with and I’d rather fix it myself. Any ideas on how to get this down a little more?
If the spoiler's curve doesn't conform exactly to the car, no amount of 3M adhesive tape will make it stay. I've tried with very thin CF trim pieces in other projects using the strongest 3M adhesive tapes you can buy. It will not stay down if the curvatures do not match.View attachment 395576 One side is flush and this is the other. Not sure if it’s worth fussing with and I’d rather fix it myself. Any ideas on how to get this down a little more?
Yeah it seems like I can push it down a bit to make it more flush, so I will try the tape and see if it works. Thanks guys! Fingers crossed!
Anyone still waiting for the spoiler and badge? I have waited for 6 month. What is the longest wait so far from owners?
Seems like there's a small gap at the end? Any gaps in the middle? Hard to tell from the picture.
To each their own, but the badge is going to look out of place on that GT350.
Mine looks just like yours. Totally flush except for the tips. Looks great and I'm totally fine with it!very small gap at the ends - I tried pushing the spoiler flush, but it relaxes back to the same shape once pressure is removed. Not sure tape would do much more than just fill the gap. No gaps in the middle - both the ranger and I were putting pressure on the spoiler to help get it seated as well as we could. As long as it doesnt grow, not a big deal
LOL - that could lead to some serious confusion
I probably wouldn't mind the small gaps at the end if my middle was completely flush. But it's notMine looks just like yours. Totally flush except for the tips. Looks great and I'm totally fine with it!