New to the forum here so I need to get some posts in to "establish" myself, I think. Anyway, installed the RPM Knight Rider turn signals and they look great. I did it with no drilling out of the old reflectors but with patience and proper plastic pry bars was able to get both old reflectors out without damage. Delivery from RPM took one week, which I thought was good considering I am in Southwest Florida. I will say this: the fish tape wire they include is essential to feed the wiring harness from the top down to that center hole (did drill out the center hole larger for running the wiring through). I am satisfied with all three modes of lighting as described in the RPM website for this product:
1. The LED's blink in a floating outward pattern when you use your turn signals.
2. When your headlights are on, the LED's stay illuminated and you gain 2 additional tail lights.
3. When you lift your foot off the accelerator the LED's blink once to alert vehicles behind you that you are slowing down, and then your normal brake lights illuminate.
Second lighting upgrade was to remove the amber only front parking lights with no amber euros with the fog light and DRL strip. Purchased a set from
www.partslinkent.com, followed a couple of YouTube videos, spliced two wires and love the look. Can't control on/off from the screen but they stay on in Automatic or On mode.
Am very interested in activating the footwell and pocket lights and have seen some posts where this is done by tapping into the puddle lights. Any suggestions or pics or videos on this would be appreciated.
Thanks for letting me be part of this forum