rbergquist
S946 - VIN 1017 & M3 2327
I just received and installed firmware 6.1 (2.2.113). Mobileye Display & iOS Mobileye both report an Er 20.
Found a Mobileye Error List doc with entry for Er 20 -- Error Details: "Speed signal is configured by CAN-bus but the system is not detecting the vehicle CAN- bus", Resolution: "Verify CAN-bus connection, or check vehicle profile is correct"
Anyone else experiencing this? Seems similar to v5.11 change problems.
- - - Updated - - -
I'd check with the Mobileye App that the High Beam feature is enabled in the Settings. My installer didn't enable it. Once enabled, it just worked -- lights were on normal and when it saw no cars ahead or coming toward me it turned high beams on/off. I really like that feature on the rural roads I drive.
Found a Mobileye Error List doc with entry for Er 20 -- Error Details: "Speed signal is configured by CAN-bus but the system is not detecting the vehicle CAN- bus", Resolution: "Verify CAN-bus connection, or check vehicle profile is correct"
Anyone else experiencing this? Seems similar to v5.11 change problems.
- - - Updated - - -
Another issue, how does the MobileEye high-beam headlight feature work on the Model S? I haven't figured out how to get mine to control the headlights and I'm think that it just isn't installed right on my car. Do people just manually turn on the high beams and then the MobileEye automatically notices that and dims them momentarily when other cars drive by in the opposite lane?
I'd check with the Mobileye App that the High Beam feature is enabled in the Settings. My installer didn't enable it. Once enabled, it just worked -- lights were on normal and when it saw no cars ahead or coming toward me it turned high beams on/off. I really like that feature on the rural roads I drive.