So, I did take delivery today. I apologize for no photos yet.
It was stupid hot and muggy. By the time I got done with the exterior inspection, I just wanted to get out of there.
There were two minor issues and two more major issues (still nothing terrible).
The lights in both front and back were not symmetrical as far as how they sat in their sockets. One side came out a little further than the other under the light assembly. It was really only noticeable when running your finger around them, so I gave it a pass.
There were a couple places with very light scratches that I'm sure my PPF guy will buff out prior to installation of the wrap. So, I'm not worried about those.
On the driver's door there is what looks like a small hair or fiber under the clear coat or maybe even under a layer of paint. I can still see it when looking right at it. I'm going to bring it up to the PPF guy and see what he can do. Maybe a little sanding might get it out.
There is a plastic cover piece over the seat belt assembly on the driver's side rear that is not sitting where it needs to be. It is popped up enough you can see the crack under it. The other side is perfectly fitted. I'm going to attempt to push this down when I get the car back. If that doesn't work, I'll put in a service request.
Other than those few things, the rest of the car looked really good. I'm very particular, so if I say it was overall good, it is.
I promise pictures once I get it back from the PPF and tint shops.