Parting out S85 (Battery Modules too!)

[satoshi]

Do you have the left fender liner?

Besides the tray/tub in the frunk. I need the driver side fender liner(goes in the wheel well). And on the driver side fender there is a bracket that the bumper slides into.

Driver side: No
Passenger side: Yes.

 

[satoshi]

Do you have any front right parts

Front right is completely undamaged, so gimme a list via PM and I'll see what's there or not.

 

[satoshi]

Do you have the frunk tub? Also need all the plastics/carpet that goes in the frunk and around it.

Yes.

 

[satoshi]

Does this have the power folding mirrors? I'd be interested in both sides.

I'm pretty sure the mirrors are not power folding... there was never an opportunity to actually turn on the car to the point that those would be actuated though.

 

[Mlmkiniry]

Do you have the nose cone?

 

[satoshi]

Do you have the nose cone?

No.

 

[bkp_duke]

Dropped you a PM

 

[Oleg]

hi im looking for right front cup and a fender apron. let me know if you have that. the cup is what holds the apron and frame rail. the top of the shock and upper arm control also attaches to it

 

[GJ79]

Do you have the silver frame around the main screen ?

 

[Oleg]

do you have the passenger side aribags? the dash and the knee

 

[JZaman]

I need the passenger side plastic rocker panel, just the one below the doors. Also need the chrome trim above the rocker panel. I could use the plastic rear diffuser if it's at the right price too.

 

[N4HHE]

Am interested in a few cells from a module to repair my string trimmer. Any leads?

 

[Hector]

I'll take black visors and all hardware also need all the light and speaker bezels for the interior. Would like the trim around screen also please text me 562-900-6628. Need plastics that hold seatbelt also. I need them in black

 

[DDotJ]

Do you have a yacht floor by any chance?

 

[SarasotaModelS]

I am in need of the rear windshield. Any scratches?

 

[islandbayy]

How much for a Battery Module? or the Whole Battery?

 

[GarrickS]

Hi, I'm looking for the extruded aluminum rear bumper crossmember. You'll find inside of the stamped steel rear bumper after removing the bumper skin. Any car with the jump seats should have it.

 

[Moxie]

Hi: I'm looking for the nosecone chrome moulding but if I can't get it separately then I would buy the complete nosecone. Thanks, Alan 289-690-3898 talk or text.

 

[TesTowne]

Would you have any of these?
Center radiator,
Plastic piece in front of center radiator
White Passenger Fender (Not pearl) White Hood (Not pearl)
White front Bumper (Not pearl)
Full size Frunk tub
Tow eye
Nose cone
Passenger Headlight
Side Curtain air bags
Drivers air bags
2 Seat belts
2 Seat belt pretensioners
Please call me at 407 486 2009

 

[Btr_ftw]

Would you have any of these?
Center radiator,
Plastic piece in front of center radiator
White Passenger Fender (Not pearl) White Hood (Not pearl)
White front Bumper (Not pearl)
Full size Frunk tub
Tow eye
Nose cone
Passenger Headlight
Side Curtain air bags
Drivers air bags
2 Seat belts
2 Seat belt pretensioners
Please call me at 407 486 2009

There is a seatbelt and pretensioner on eBay. A friend of mine just bought one.

I have the plastic piece that holds the radiator in the back