I’ve been overseas for 3 months and arrived back this week. Tyres were all around 37psi so topped them up and made the drive home on software version 28.something with no issues. This morning a tyre down to 13PSI and a screw through the middle of the tread. Took it to a local independent garage for a repair but also to do my summer winter swap. Imagine the shock when I came out to find my car balanced on 4 trolley jacks with no wheels!
Anyway, all was fine - thankfully - and they also fixed a puncture from last winter too.
While the wheels were off I noticed some serious corrosion / pitting on the brakes. I know it a known issue on the P but didn’t think they were this bad…
It’s done a 200 mile motorway trip since retuning and cleaned the surface rust off but those are quite deep grooves.
Also while the wheels were off, I noticed the paint flaking off the wheel arches…..and seemingly rusting!
It’s just updated to 44.1 and then a big map update too. Anyone come across the paint on the arches issue?
Apart from that, it seems to have faired well from 92 days without moving.
Anyway, all was fine - thankfully - and they also fixed a puncture from last winter too.
While the wheels were off I noticed some serious corrosion / pitting on the brakes. I know it a known issue on the P but didn’t think they were this bad…
It’s done a 200 mile motorway trip since retuning and cleaned the surface rust off but those are quite deep grooves.
Also while the wheels were off, I noticed the paint flaking off the wheel arches…..and seemingly rusting!
It’s just updated to 44.1 and then a big map update too. Anyone come across the paint on the arches issue?
Apart from that, it seems to have faired well from 92 days without moving.