You can install our site as a web app on your iOS device by utilizing the Add to Home Screen feature in Safari. Please see this thread for more details on this.
Note: This feature may not be available in some browsers.
Here is picture of my 2013 Tesla Model S85 New Facelift using OEM Bumper
Tesla allowed me to order all the parts today. I will be building a custom T piece. But it will probably be 4 to 6 weeks until parts come in they said.
Find me a part number for those two... and I'll order it!
Looks like the parking sensor holes are covered up, did the body shop do that for you? No issues?
What was your parts list if you don't mind sharing? I'd like to cross reference with mine before I try to order. Also what was your total cost?
This is mine so far...
View attachment 287750
View attachment 287751
So all-in how much did this run you?
I ordered all of the front grill items minus the tow hook..(including all the hardware, down to thw washers)
I also ordered the new undertray as the original poster said it was needed. As well as the front bumper lower grill/ducting.. i had purchased a used front bumper for 150. Parts from tesla for the grill only were a little over 200.. and about 150 each for the undertray and ducting/lower grill..
Total parts I have just under 700.
I will be designing and 3d printing a custom T piece. (My buddy has a very nice 3d printer) If you're interested once I'm done with the piece email me.
[email protected]
Don't quote me on the parts... but this should cover everything lol... I'll update and do a write up once they've all come in and its installed. So might be able to cut down on some of the parts ordered.
6008189-00-F (front aero shield)
1058022-00-B Front end ducting
1062472-00-E - T BADGE SUPPORT
40.00
1056386-00-E - T-BADGE, FR FASCIA MS2
14.00
1006533-00-A - SCR,M5-1.8X14,SCKT PAN WSHR HD,TORX,SST
0.13
1006533-00-A - SCR,M5-1.8X14,SCKT PAN WSHR HD,TORX,SST
0.13
1065233-00-C - V-BAR SUB ASSY MS2
80.00
1062645-00-A - EDGE CLIP,6x20 HOLE,14.5x1.3 RIB
0.25
1062645-00-A - EDGE CLIP,6x20 HOLE,14.5x1.3 RIB
0.25
1062645-00-A - EDGE CLIP,6x20 HOLE,14.5x1.3 RIB
0.25
1062645-00-A - EDGE CLIP,6x20 HOLE,14.5x1.3 RIB
0.25
1006529-00-A - BOLT HF M6X18 PC88 MAT
0.50
1006529-00-A - BOLT HF M6X18 PC88 MAT
0.50
1006529-00-A - BOLT HF M6X18 PC88 MAT
0.50
1006529-00-A - BOLT HF M6X18 PC88 MAT
0.50
1012809-00-A - SCR ST WSHR M5 X 20 ZnNi
0.25
1012809-00-A - SCR ST WSHR M5 X 20 ZnNi
0.25
1012809-00-A - SCR ST WSHR M5 X 20 ZnNi
0.25
1012809-00-A - SCR ST WSHR M5 X 20 ZnNi
0.25
1012809-00-A - SCR ST WSHR M5 X 20 ZnNi
0.25
1012809-00-A - SCR ST WSHR M5 X 20 ZnNi
0.25
1012809-00-A - SCR ST WSHR M5 X 20 ZnNi
0.25
1012809-00-A - SCR ST WSHR M5 X 20 ZnNi
0.25
1012809-00-A - SCR ST WSHR M5 X 20 ZnNi
0.25
1061331-00-B - FASCIA SUPPORT BRACKET MS2 LH
12.00
1061332-00-B - FASCIA SUPPORT BRACKET MS2 RH
13.20
1009420-00-A - BLT HF M6-1.00x20[8.8]ZnAlW
0.50
1009420-00-A - BLT HF M6-1.00x20[8.8]ZnAlW
0.50
1009338-00-A - PALNUT M5x10
0.81
1009338-00-A - PALNUT M5x10
0.81
1057847-00-C - GRILLE COVER UPR, FR FASCIA MS2
26.00
1057850-00-B - GRILLE COVER RH, FR FASCIA MS2
12.00
1057845-00-B - TOW HOOK COVER, FR FASCIA MS2
18.00
1055832-00-B - SCREW-M6-1.0X18.5,5 LOBE EX TORX
1.00
1013802-00-B - J-NUT M6 0.5-3.0 MULTITHREAD
0.50
1013802-00-B - J-NUT M6 0.5-3.0 MULTITHREAD
0.50
Luis what did you end up doing for the T-piece?
So $1800 all in, and thats with a shop doing all the work??