You can install our site as a web app on your iOS device by utilizing the Add to Home Screen feature in Safari. Please see this thread for more details on this.
Note: This feature may not be available in some browsers.
after I updated to 8.0 my dash camera installed to loose connector by the microphone it used to have power all the time now after 8.0 it goes off when car is locked, any one have idea of another easy way to keep my camera on all the time.
after I updated to 8.0 my dash camera installed to loose connector by the microphone it used to have power all the time now after 8.0 it goes off when car is locked, any one have idea of another easy way to keep my camera on all the time.
I run my Blackvue 650 cord through the hinge area in the passenger side door, behind the front right quarter panel, and under the hood into the frunk area. Works great and you can't see a thing.
Both of our cars with Blackvues (550/650) hardwired into the 12v in the headliner under the grille work fine under v. 8. Are you absolutely sure that your installer used a meter to test out the point on the connector and is hooked up to the 12v and ground?
Basically you run it from the command prompt (with IP address flag) and it will download files on the SD card to the destination folder on your computer. It will skip any files already present in the target, so you do have to hold on to files until you reformat or they get written over for greatest efficiency. If you dig around the site a bit, he has a much more technical and robust description of how the script works and how he/others figured out the camera's file system if you're into coding and such... It was so much easier when you could just FTP into the thing...