bmwmkc323i
Member
Finally had a chance to get the new wheels put on today. Went with Rays Gramlights 57DR (Semi-gloss) 19x9.5 ET35 with 265/35/19 Falken 460AS tires.
Attachments
Last edited:
You can install our site as a web app on your iOS device by utilizing the Add to Home Screen feature in Safari. Please see this thread for more details on this.
Note: This feature may not be available in some browsers.
Finally had a chance to get the new wheels put on today. Went with Rays Gramlights 57DR (Semi-gloss) 19x9.5 ET35 with 265/35/19 Falken 460AS tires.
Lower it more? Actually it is already too low for me and I was planning to raise it up slightly because already scraping. It is lowered on tein flex z's with just under 2 finger gap.Great to see them on. Need lows now.
Yah imo it needs some moar low! Only if you are open to it thoughLower it more? Actually it is already too low for me and I was planning to raise it up slightly because already scraping. It is lowered on tein flex z's with just under 2 finger gap.
Thanks man! Yeah, I love my set up right now. IMO this set up really fits the model 3 and the ride is great too. I wish I could go slightly lower but I'm fine with how it is since its my daily and I carry my family in it too. I'm on coilovers and I have 15 mm spacers front and rear. Brakes are stock, I only have aftermarket covers on it.This looks so damn good. Love how beefy they are and I’m strongly considering going with this same setup. I’m on coilovers with rear camber arms. Did you need to use spacers to clear the knuckles or camber to clear the fenders? Wonder if PS4S would have roughly the same fitment. I hear they run wide, maybe wider than the Firestones you grabbed. Are you on performance brakes and rotors?
Finally had a chance to get the new wheels put on today. Went with Rays Gramlights 57DR (Semi-gloss) 19x9.5 ET35 with 265/35/19 Falken 460AS tires.
Def lower it lol. I'm on Flex Z as well but may change it up back to MPPs since I usually run KWs on all my cars.Lower it more? Actually it is already too low for me and I was planning to raise it up slightly because already scraping. It is lowered on tein flex z's with just under 2 finger gap.
Sidewall would be a little too bubbly for my taste.Anyone try the apex v601 in 285/35/19 on the system spec TE37’s?
Saw that this specific size was like 40% for $600 shipped and figured If it fits, I might as well try em! Knowing the v601’s run narrow (ish) I wonder if the 285’s will work or not….
Anyone try the apex v601 in 285/35/19 on the system spec TE37’s?
Saw that this specific size was like 40% for $600 shipped and figured If it fits, I might as well try em! Knowing the v601’s run narrow (ish) I wonder if the 285’s will work or not….
Sidewall would be a little too bubbly for my taste.
-Danny
I'm sure it would work but I think you'd probably need to raise your car for sure and the sidewall would definitely look more like a floatie.
255s stretched a tiny bit, 265s are perfect & 275s would be a tad wide.
Thanks for the feedback from both of you guys! In that case I’m sticking with the 265/35. Next choice is v601 or the fk460!Sidewall would be a little too bubbly for my taste.
-Danny
Thanks for the feedback from both of you guys! In that case I’m sticking with the 265/35. Next choice is v601 or the fk460!
It's considered flush for stock height vehicles.Has anyone tried Dinan - Hyper Kinetic™ HB003 flow formed wheels? Looking for new wheels and was wondering how the fitment is. Their fitment options for 20 x 8.5 is et30 and et30. Looking for something flush and if its not flush I can use spacers but just curious on the math on what spacer size i'd need
Should've mentioned that I am lowered hahaIt's considered flush for stock height vehicles.
-Danny
You can run some spacers if the backed of those wheels support it. Meaning a deep cavity to accommodate for your factory studs.Should've mentioned that I am lowered haha
They are forged and HREs from what I understand. They look better without the aero clip in pieces.Ugly wheels on the 2024 M3P. And in Europe we get 50 less horsepower. :-(