DIY turn back DC charge after tesla blocked it.

[remyygaa]

I have seen this web page too, is this trusted? How the soft works? Can it activate factory mode? Can i do callibrations? I have linux skills

Yes, You can trust that guy, but for tesla toolbox i have seperate PC-no personal info in it, no risk or You can buy also from Tesla Toolbox купить диагностика model s x they are really profesionals in tesla programing, they helped me also. all programing done by remote. can trust them.

 

[sabaxxi]

Yes, You can trust that guy, but for tesla toolbox i have seperate PC-no personal info in it, no risk or You can buy also from Tesla Toolbox купить диагностика model s x they are really profesionals in tesla programing, they helped me also. all programing done by remote. can trust them.

Thank you ^_^

 

[remyygaa]

Also i have problem like this, for my us car i bought ccs retrofit (ehat car need) from official tesla and received this, please see pictures. This make problem to home charger (original) T eas blinking 6 times (pilot foult) than i replaced wires and home charger start work good, why tesla make this mistake? I have seen other cable and ecu with same part numbers, sended from other eu country and same mistake

I also bought ccs2 retrofit, also see same pins dont match. Did You just moved two black wirres to match pins and all works now? Have otherfastchrge 1, but i think need writte also pcladaptertype 1 to ccs to work. I have model s facelift

 

[sabaxxi]

I also bought ccs2 retrofit, also see same pins dont match. Did You just moved two black wirres to match pins and all works now? Have otherfastchrge 1, but i think need writte also pcladaptertype 1 to ccs to work. I have model s faceliftView attachment 1007436

I have model s 2016.03 too i have wroten there otherfastcharge to 1 and now showing enabled, also i have relocate wires but DC not working, my error code is BSM_u011, if will find reason give you to know.
What can you say about plcadaptertype? I think this is chademo option, i have enabled both but DC don't work anyway.
Also ccs retrofit supplier recomend me to reinstall software, but my tesla don't going to service mode, after entering password, doing nothing. i have soft ver: 11
premium connectivity - lifetime

 

[remyygaa]

I have model s 2016.03 too i have wroten there otherfastcharge to 1 and now showing enabled, also i have relocate wires but DC not working, my error code is BSM_u011, if will find reason give you to know.
What can you say about plcadaptertype? I think this is chademo option, i have enabled both but DC don't work anyway.
Also ccs retrofit supplier recomend me to reinstall software, but my tesla don't going to service mode, after entering password, doing nothing. i have soft ver: 11
premium connectivity - lifetime

Hi, You need to writte new line in internal.dat file writte- pcladapterpype 1. then restart gateway. then need service-redeploy.

Also i have problem like this, for my us car i bought ccs retrofit (ehat car need) from official tesla and received this, please see pictures. This make problem to home charger (original) T eas blinking 6 times (pilot foult) than i replaced wires and home charger start work good, why tesla make this mistake? I have seen other cable and ecu with same part numbers, sended from other eu country and same mistake

UPDATE: reached my ccs2 seller for wirring-got answer not to touch wirres on ccs ecu, leave it as it is, and all must work. I will try to install it tomorrow and make config+redeploy.

 

[sabaxxi]

Hi, You need to writte new line in internal.dat file writte- pcladapterpype 1. then restart gateway. then need service-redeploy.

UPDATE: reached my ccs2 seller for wirring-got answer not to touch wirres on ccs ecu, leave it as it is, and all must work. I will try to install it tomorrow and make config+redeploy.

Redeploy is necessary? I have soft v11
Plcadaptertype 1 is for model 3 and y as i know, model s and x need only otherfastcharge 1,
Also ccs supplier told me that i need update config in ccs, or just reinstall software, after activation ccs.
Please give as to know about result

 

[remyygaa]

Redeploy is necessary? I have soft v11
Plcadaptertype 1 is for model 3 and y as i know, model s and x need only otherfastcharge 1,
Also ccs supplier told me that i need update config in ccs, or just reinstall software, after activation ccs.
Please give as to know about result

hi, model s,x need new entry in config plsadaptertype 1, no need plcSupportType 1 (only on tesla 3 and y models). no need to change pin on wrirring (as you did). needs can-redeploy or service-redeploy to match firmware. I installed now and did config, no erorr codes, ac charge works, dc dont work. i will do can-redeploy, inform you

 

[islandbayy]

Yes, You can trust that guy, but for tesla toolbox i have seperate PC-no personal info in it, no risk or You can buy also from Tesla Toolbox купить диагностика model s x they are really profesionals in tesla programing, they helped me also. all programing done by remote. can trust them.

I Don't use Whatsapp. Any idea how much $ he wants for Toolbox?

 

[brainhouston]

I Don't use Whatsapp. Any idea how much $ he wants for Toolbox?

Don't know how much in this case but i've seen it in the range of $50-150
Don't pay more than that, its a dying version anyways...

 

[islandbayy]

Don't know how much in this case but i've seen it in the range of $50-150
Don't pay more than that, its a dying version anyways...

I'm seeing that, seems it only works for MCU1.

 

[brainhouston]

I'm seeing that, seems it only works for MCU1.

and only for older versions, no factory mode on latest ...

 

[remyygaa]

and only for older versions, no factory mode on latest ...

Yes, best mcu1 vesion v11 2022.8.10.5 i have downgraded to it, with factory mode still working-toolbox2.1 best working, for mcu2 need online toolbox3.

 

[remyygaa]

I Don't use Whatsapp. Any idea how much $ he wants for Toolbox?

He uses telegram also, price for toolbox 2.1 offline 100 usd.

 

[brainhouston]

Yes, best mcu1 vesion v11 2022.8.10.5 i have downgraded to it, with factory mode still working-toolbox2.1 best working, for mcu2 need online toolbox3.

side question, how did u downgrade? did u use the guide posted here on TMC?

 

[remyygaa]

side question, how did u downgrade? did u use the guide posted here on TMC?

Yes i downgrade. Instruction here: Downgrading Tesla firmware on MCU1 ,all worked nice, not from first time, but all works

 

[remyygaa]

Ccs works now, service-redeploy only with deleted root and working cid-updater, no need internet wifi.

 

[yutian]

大家好，
我购买了回收的特斯拉 model s 2016 sw 2020.48 v10.2。修理它并一直使用它 - 很棒的家庭车。我使用 chademo 没有任何问题，但在获得汽车在线后，特斯拉远程关闭了直流充电。现在汽车离线了，我可以再改成直流充电吗？我有 PC 和 fakra 电缆，可以从 IC 连接下连接到 CID，没有问题。我安装了 git bash 来查看一下网络，一切都很顺利。现在据我所知，我需要打开诊断端口来 downdolad 并更改internal.dat 文件？或者做其他事情？如果有人可以的话请帮忙。如果需要的话我可以捐款。

我遇到了这个问题，你是怎么解决的？

 

[yutian]

@LayZ 另请pm我

 

[brainhouston]

@yutian be patient, he'll get back to u, he's busy n doesn't frequent this forum very much
also, u don't need to post in 5 different threads about same thing...
Pro tip for u, forum requires about 10 posts to have DM option

 

[yutian]

@yutian be patient, he'll get back to u, he's busy n doesn't frequent this forum very much
also, u don't need to post in 5 different threads about same thing...
Pro tip for u, forum requires about 10 posts to have DM option

I see. Thank you.