Thought it may have just been a quick glitch, but even after rebooting, seems like I can't get Auto anything to come up...... Also, cameras don't seem to be active either as i'm not getting any road or car detection on the screen... Any thoughts?
You can install our site as a web app on your iOS device by utilizing the Add to Home Screen feature in Safari. Please see this thread for more details on this.
Note: This feature may not be available in some browsers.
Tried last night, still nothing this morning. Think i'm going to schedule a call with Tesla.Try a full shutdown from the menu. I was having problems with Auto Pilot. I’m not sure where it is, maybe service.
Geez, no troubleshooting on their part either?I am on 8.5 and lost autopilot, autosteer and traffic aware cruise control last week. I contacted Tesla twice and they have no explanation as to what happened other than it being a "glitch". They also don't know when I will get autopilot back on the car.
I'll try this right after work and report back. Thanks!Not sure if this will help but it solved the problem when it happened to me. Put the car in park and disable Autosteer and TAAC. Drive for a a mile or so (this may not be necessary - just sharing my exact steps) and then put it back in park. Re-enable Autosteer and TAAC. Everything worked for me after that.
Nada It's extra broken. Scheduled service for Tuesday, so will see if they come back with any informative troubleshooting. Stay tuned.Not sure if this will help but it solved the problem when it happened to me. Put the car in park and disable Autosteer and TAAC. Drive for a a mile or so (this may not be necessary - just sharing my exact steps) and then put it back in park. Re-enable Autosteer and TAAC. Everything worked for me after that.
Bummer!Nada It's extra broken. Scheduled service for Tuesday, so will see if they come back with any informative troubleshooting. Stay tuned.
"Knowledge about what firmware version were out there" is a little concerning...A Tesla tech just called me, as well. Said he could see no issues from remote diagnostics, and that it was likely just a fluke. Unfortunately, he had no ability to push firmware updates (or even knowledge about what firmware versions were out there) -- just said I'd have to wait until my number came up.