You can install our site as a web app on your iOS device by utilizing the Add to Home Screen feature in Safari. Please see this thread for more details on this.
Note: This feature may not be available in some browsers.
Yes, mine does. It’s handy for the latch system anchor.To those who have the shelf, is it normal for there to be a gap between the rear seats and the parcel shelf even when the seats are fully reclined?
You ordered parts over the counter or via app?Just for information, I tried getting my SC/mobile service (in Canada) to install the parts (1661180-00-A, 1661181-00-A and 1641293-00-D) but they refused because it wasn't an 'approved Tesla retrofit'. So, I just installed it myself. Took a couple of hours, but the parts do work with the older style lower trim (without the full carpet). You definitely need to remove the lower trim to access the seatbelt bolt as others have mentioned. Sound doesn't seem too different to me but I still have to do more testing.
Also, the parts said Tesla TX (which I assume is from Giga Texas), but nevertheless worked with my Fremont built MYP.
That’s a good point.Yes, mine does. It’s handy for the latch system anchor.
I just emailed the Tesla parts guy and he ordered it for me.You ordered parts over the counter or via app?
Mine does too however the bigger seat (double seat) locks in flush if I push it all the way back but the smaller seat doesn't so I just keep the gap to keep it all evenTo those who have the shelf, is it normal for there to be a gap between the rear seats and the parcel shelf even when the seats are fully reclined?
Did you order parts in app to a specific SC? They would not even allow me to order the parts because it wasn't an "approved retrofit". Mind sharing how you ordered the parts in Canada?Just for information, I tried getting my SC/mobile service (in Canada) to install the parts (1661180-00-A, 1661181-00-A and 1641293-00-D) but they refused because it wasn't an 'approved Tesla retrofit'. So, I just installed it myself. Took a couple of hours, but the parts do work with the older style lower trim (without the full carpet). You definitely need to remove the lower trim to access the seatbelt bolt as others have mentioned. Sound doesn't seem too different to me but I still have to do more testing.
Also, the parts said Tesla TX (which I assume is from Giga Texas), but nevertheless worked with my Fremont built MYP.
In my case I ordered the parts through the app, and I gave them the screenshot of the work order published here.You ordered parts over the counter or via app?
Crazy....They are extremely strict about not selling parts now at the service centers. After going through multiple scs here in Socal I finally managed to have one ordered the parts for me only to get shot down at pick up. The parts dept mgr will go out of their way not to sell these because apparently if they do they will have to provide a written explanation to the regional head on why the parts was sold. My guess it there is a supply shortage right now and they will provide their own retrofit later down the line for the other cars.
I'm very p*****. Also they change the parts on me and I asked them 6 × 2 confirm that there were the correct parts because I could not......grrrrCrazy....
So I had these parts on order since September.....multiple back, forth l, up and down....finally parts came in.
Went to service center to pick them up and just to make sure, I visually inspect the parts brought out. That was after I got over my giddiness that I'm finally getting this thing done. So everything looks fine except there's one part that's fully wrapped in bubble wrap and I notice that the installation on the inside of it looks awfully like the from factory installation. Long story short it is a c pillar for model Y without parcel shelf. Thankfully I checked before Before paying and walk on the way.... When the parts guy wants to try and order the correct pillar he tells me that hes blocked because there's some internal memo that he can't show me from a top that they can no longer allow this retro fit
So 3 months of waiting and A few hours of waste of time only to come up empty
What part numbers did you order?I'm not even sure what parts to order now as they've changed the part numbers....anyone have any current insight to part numbers?