I used Lamin-X. However, Stek DYNOshield is a much more clear film. Not as much texture with the DYNOshield. Lamin-X on the headlights will show the texture in the beam.What did you use to tint your tails? Looks good.
You can install our site as a web app on your iOS device by utilizing the Add to Home Screen feature in Safari. Please see this thread for more details on this.
Note: This feature may not be available in some browsers.
I used Lamin-X. However, Stek DYNOshield is a much more clear film. Not as much texture with the DYNOshield. Lamin-X on the headlights will show the texture in the beam.What did you use to tint your tails? Looks good.
What kind/size of tires do you have?Here is a shot of 19x9.5 +30 square to give you a idea... a little bit of poke in frontView attachment 380276 View attachment 380279
Sorry to hear about the issue, can you please send me an email and so we can look into this and get this figured out for you asap? Thank you! [email protected]So yesterday I decided it was time to remove swap my all seasons tires/wheels (mounted on the factory 20" performance wheel) back and remove my Ohm Lightning wheels with the Michelin winter tires. Haven't really driven much since March and summer is creeping up on us already.
All four wheels were stuck to the hubs and I could not yank them loose! I had to use a BFH with several whacks to get the wheels off. Now I'm concerned something wasn't right, because I remember too that they took many turns to torque down correctly when I installed them. What could have happened here, was something not machined correctly, and did they not mate correctly to begin with? I don't think I want to put them back on again!
Pics of wheel and hub attached.
So yesterday I decided it was time to remove swap my all seasons tires/wheels (mounted on the factory 20" performance wheel) back and remove my Ohm Lightning wheels with the Michelin winter tires. Haven't really driven much since March and summer is creeping up on us already.
All four wheels were stuck to the hubs and I could not yank them loose! I had to use a BFH with several whacks to get the wheels off. Now I'm concerned something wasn't right, because I remember too that they took many turns to torque down correctly when I installed them. What could have happened here, was something not machined correctly, and did they not mate correctly to begin with? I don't think I want to put them back on again!
Pics of wheel and hub attached.
Late post, but got my Stance SF07's from Jason at GYW a few months back...
The rims are 19x8.5 +35 square setup wrapped in General GMAX RS 245/40/19 summer rubber. They are flow-forged and a few pounds lighter than the Tesla 19" Sport wheels. Loving them more and more especially with my recent Eibach Pro-Plus kit install.
View attachment 572271
2018 Model 3 with 20" Forgestar CF10. Can't wait to see someone do the most popular design, the F14
Size: 20x9.0 | 20x10.5
Finish: Gloss Piano Black
Tires: Michelin Pilot Super Sport 245/35/20 | 285/30/20
Other: Rotary Forged | OE TPMS Compatible | Custom Offsets available
We dont have exact weights, but we'd say approximately about 24lbs! Let us know if you're interested in a setWhat is the weight of the cf10s in a 19x9?
Definitely interested, but holding off a few months for ordering. Do you guys normally run specials around black friday?We dont have exact weights, but we'd say approximately about 24lbs! Let us know if you're interested in a set
Definitely interested, but holding off a few months for ordering. Do you guys normally run specials around black friday?
Looks nothing alike..The SF07s look similar to the Vertini RF1.2s - also from GYW.View attachment 572469
Thank you for checking. What is normally the lead time on these?Forgestar has in the past, but I asked them and they said they dont have any info right now on if or when they'll be running any sales yet.
Right now their builds are taking about 6-8 weeks on average, but that can very depending on the availability of their blank partsThank you for checking. What is normally the lead time on these?
Do you guys keep any SKUs in stock?Right now their builds are taking about 6-8 weeks on average, but that can very depending on the availability of their blank parts
We dont, all Forgestar wheels for the Tesla are made to orderDo you guys keep any SKUs in stock?
Would you recommend a +35 offset on a 19x9 wheel if I plan on using 255/40/19 tires?We dont, all Forgestar wheels for the Tesla are made to order
If lowered that should fit pretty well, if on stock suspension the fronts might poke very slightly, but it shouldnt be too badWould you recommend a +35 offset on a 19x9 wheel if I plan on using 255/40/19 tires?