How long does it take to install? I looked at something similar for our Y and it seemed very time consuming.
You can install our site as a web app on your iOS device by utilizing the Add to Home Screen feature in Safari. Please see this thread for more details on this.
Note: This feature may not be available in some browsers.
It is time consuming and you should plan on taking a couple hours. Thats about what it took me on my last one.How long does it take to install? I looked at something similar for our Y and it seemed very time consuming.
Here’s the install video for the older S which should help give some idea.How long does it take to install? I looked at something similar for our Y and it seemed very time consuming.
Is it that small? I had a MYP before and loved my frunk...I just assumed that the S was the same size roughly, but Ive never seen it in person. I guess ill find out next Monday lolHave their unit on my Y, works great. Not sure I will install on the refresh S as the frunk is useless small in comparison to the Y or previous S. Stinky takeout food is about all that will ever be put in there as long as I order a small size that is. Happy meal should fit though.
The thing I hate about the funk is that it's not flat...it's sloped downward so your pizza topping would all slide to one side by the time you got home. Stupid design.CAn u fit a large pizza
I was obviously exaggerating in my response but yes you will be disappointed in comparison to the Y. Both smaller and less deep.Is it that small? I had a MYP before and loved my frunk...I just assumed that the S was the same size roughly, but Ive never seen it in person. I guess ill find out next Monday lol
Or you could put a small box or piece of foam under it to make it level, and be sure not to make any fast turns, accelerate or brake hard too.The thing I hate about the funk is that it's not flat...it's sloped downward so your pizza topping would all slide to one side by the time you got home. Stupid design.
The frunk is sealed and has no air circulation.Maybe silly question but people keep talking about keeping food in the frunk so it doesn’t stink up the car. But isn’t the air intake for the AC in the frunk?
I would say that depends on how good the QC is on that particular car.The frunk is sealed and has no air circulation.
The seal at the top of the frunk chamber should fully contact the hood and prevent water ingress. If not then you will definitely need a service visit.I would say that depends on how good the QC is on that particular car.
On my S I just took delivery off, there was a big enough gap water could easily go into it from the front.
I can’t tell if you’re being sarcastic but I hope you know the frunk can be opened from the outside without a key fob.Hey guys do not forget that the frunk is the absolute safest location for important documents or expensive equipment in high theft areas.
Add a code for the start also.
I'm pretty sure that is long gone and not applicable to current models. It was not in my 2021 Raven.I can’t tell if you’re being sarcastic but I hope you know the frunk can be opened from the outside without a key fob.
View attachment 775147
That is where i secure important items as well.Hey guys do not forget that the frunk is the absolute safest location for important documents or expensive equipment in high theft areas.
Add a code for the start also.
Did Tesla move the high voltage cable access elsewhere?I'm pretty sure that is long gone and not applicable to current models. It was not in my 2021 Raven.
The releases are no longer in the manual and when I installed the power frunk in my Raven I'm sure they were not present.Did Tesla move the high voltage cable access elsewhere?
I believe the manual release was for safety reasons, giving firefighters access to cut the cables in case of vehicle accident where power is lost.
You’re right I looked through it and no mention of manual release. Glad they changed that, was never happy about the frunk having such easy access for criminals.The releases are no longer in the manual and when I installed the power frunk in my Raven I'm sure they were not present.
Your point makes sense though. I def want to check this to be sure.
Edit: Here is the 2021+ Model S Emergency Response guide. The HV cut loop is still under the hood. They only non-standard method they mention for opening the frunk is applying 12v to the wires in the tow eye but it only works if no low voltage power. They expect it to be opened by standard methods otherwise.