Today I installed all the new parts to my June 2014 UK spec. S85:
- Heated SCCM
- Heated ECU
- Steering wheel wiring harness (airbag connectors were different so I used the old airbag harness section)
- Heated wheel
- CAN Rev. E buttons
After powering on the IC would not boot up. Lots of errors thrown, including IC_MIA (Missing In Action) and Climate Control faults, CAN 1 bus off etc.
Couldn't reboot using the wheel buttons as they're not deployed yet, so it's still expecting the LIN buttons.
Tried to telnet in to the MCU by using the ethernet from the IC, but it wouldn't let me in. I could ping the MCU, but it refused the telnet access (I'm on V8.1 BTW).
Tried a factory deploy using my T-CAN tool. It rebooted the MCU but still no IC.
Went back to the old parts at that point as was getting worried about the IC. It all came back up working OK. So, now I'm a bit stuck.