bwherry
Member
I fixed that noise as well. So, it was a "compound noise" if you will. Two factors. But the bushing itself was fine - essentially, the place that did my alignment just left it a little too loose.
Compound noise, sonofa... Thanks, @Aggmeister2010 . So how'd you fix that? Just tightened the inner control arm mounting bolt a bit until the play went away?
I did have an alignment done after my UP lowering brackets were installed and now I'm trying to remember if I had this knocking sound before that... Another possibility for the SC to check when the car is there on the 19th!
Brian