rotus8
Member
Unplugged sent me a new tighter set of front bar bushings and my clunk is gone! Now I can really enjoy the car again.
You can install our site as a web app on your iOS device by utilizing the Add to Home Screen feature in Safari. Please see this thread for more details on this.
Note: This feature may not be available in some browsers.
Yes! They are currently in production and the ETA from our supplier is November. This has been almost 2 years in the making, who knew sway bars would take so long!@MountainPass I just went through the entire thread and I saw that a little over a year ago you mentioned that the sway bar is coming. Do you have an estimated date? I'm in the market for sway bars.
Currently have MPP FUCA and MPP Rear Camber arms so MPP sway bars would be great too.
November 2021? Tell us a story how is that possibleYes! They are currently in production and the ETA from our supplier is November. This has been almost 2 years in the making, who knew sway bars would take so long!
Awesome really looking forward to how you differentiate your swaybars and give it that MPP touch!Yes! They are currently in production and the ETA from our supplier is November. This has been almost 2 years in the making, who knew sway bars would take so long!
How it can take so long to go from design to production? First emails with the supplier in Jan 2020, then testing their current bars they offer, making design changes, and manufacturing prototypes. That was 13 months from first contact to get a prototype set in hand. The prototypes got delayed in shipping for almost a month by FedEx misplacing them, then after approving prototypes and making a few changes, 8 months lead time for them to be built.November 2021? Tell us a story how is that possible
Good things take time.How it can take so long to go from design to production? First emails with the supplier in Jan 2020, then testing their current bars they offer, making design changes, and manufacturing prototypes. That was 13 months from first contact to get a prototype set in hand. The prototypes got delayed in shipping for almost a month by FedEx misplacing them, then after approving prototypes and making a few changes, 8 months lead time for them to be built.
That's horrible. I don't understand how such suppliers still alive in 2021.How it can take so long to go from design to production? First emails with the supplier in Jan 2020, then testing their current bars they offer, making design changes, and manufacturing prototypes. That was 13 months from first contact to get a prototype set in hand. The prototypes got delayed in shipping for almost a month by FedEx misplacing them, then after approving prototypes and making a few changes, 8 months lead time for them to be built.
Will all new front sway bars be shipped with the tighter bushings?Hi Husky Fan, we are closed for 4th of July but as a small business owner I try to be available even when closed and your message has reached me. Your email sent during the holiday will be responded to by our dedicated team when we reopen next week but I would like to assure you that we will support you 110% every step of the way for the aftersales support that we pride ourselves in.
We guarantee silent operation and full satisfaction of all of our products and we will ensure our full support.
To move rapidly we will provide new bushings to verify completely silent operation of the sway bars (as there was an earlier small production batch of sway bars that we found had occasionally been reported to have some noise and we’ve since switched bushing source).
While we can’t be certain that the noise you are hearing is from our sway bars, for purposes of speed I will proceed regardless and we will ship you the new replacement bushings ASAP. In the event that it is our sway bar that is making noise then the only cause we’ve ever seen was from one particular irregular batch of front bushings and thankfully is a very fast swap out and fix. You have a lifetime warranty on our sway bars and we will make sure they operate perfectly and silently for years to come. I look forward to next week following up to ensure your car is riding perfect and silent as we expect it to.
I’ll PM you directly my personal contact info so that I may be of service if you need anything at all.
Have a great 4th of July!
Sincerely,
Ben Schaffer
Unplugged Performance
Everyone is trying to survive in 2020/2021. Shortage of everything plus the pandemic. I don’t want to get into politics but you know why.That's horrible. I don't understand how such suppliers still alive in 2021.
Sway bar is not a rocket science. It is the simplest possible product. If you have specs of what you want - there are way too many places to do it, so I don't know how this factory survives with 8 months lead time.Everyone is trying to survive in 2020/2021. Shortage of everything plus the pandemic. I don’t want to get into politics but you know why.
Sway bar is not a rocket science. It is the simplest possible product. If you have specs of what you want - there are way too many places to do it, so I don't know how this factory survives with 8 months lead time.
Unless it's some carbon-kevlar bearings mounted active dynamics sway bar.
Anyway, it happens, my condolences to MPP about such delay.
EVERY company has revisions based on customer feedback and real world experiences. There’s none out there that gets it correct out of the gate especially in the EV world.Excellent thread, read it from the beginning. It is nice to see the history of the UPP bars and how they addressed it's shortcomings.
Sorry, didn't mean to be confusing. It's 98 Nm for all of the front end link nuts, top and bottom:
View attachment 555578View attachment 555580
The 35 Nm value is for the nuts holding the bushing mounts:
View attachment 555579
Your English is better than my Italian!Sorry guys if I resurrect this topic, but what are the tightening values for Front sway bar end link nut. In some previous post I read 73 ftlb, is it for the aftermarket model or the stock one?
Thanks and sorry for my English
Grazie Amico mio!! e soprattutto per la celere risposta!Your English is better than my Italian!
I simply would like to restore the original endlinks with the original sway bar, and I would like to set the endlink nut tightening back to its original parameters, could you tell me what they are for Model Y RWD? Is the correct value 98nm or some other?
Sorry if I'm repetitive, but I would like to be sure and not misinterpret the answer.