I had a Tesla wi-fi enabled wall connector installed yesterday. When I try to use the PW given to me to connect to the connector, my i-phone says it is the wrong PW. Suggestions?
You can install our site as a web app on your iOS device by utilizing the Add to Home Screen feature in Safari. Please see this thread for more details on this.
Note: This feature may not be available in some browsers.
That may be a product number, not the credentials:I have installed the GEN 3 and it has a tiny Q Code inside that gives me the password of WBSB7S20003M02048 which of course does not work. I have tried removing leading characters etc with no luck. I am very technically savvy but no love at all. Any ideas?
The Quickstart Guide, included in the Wall Connector Box, has a sticker on the top of the front page with important information about this unique device, and should be kept with the owner after commissioning.
To connect to the Wall Connector’s access point with a smartphone or laptop, scan the QR code on the Quickstart Guide sticker, or manually connect to the Wi-Fi network with the SSID and Password provided.
I do not have the quick start guide - any options?
I do not have the quick start guide - any options?
A unique SSID Wi-Fi network name and WPA2 password for connecting to the Wall Connector are printed on a label at the rear of the main unit, just don't ask me how to remove the unit.I do not have the quick start guide - any options?
I had a Tesla wi-fi enabled wall connector installed yesterday. When I try to use the PW given to me to connect to the connector, my i-phone says it is the wrong PW. Suggestions?
Just answering to myself in case anyone has the same issue. I fixed the commissioning interface by switching browsers. I was using goggle that was too dumb to initiate the IP command so instead open duck duck go or Firefox and worked immediately. I set mine with no hassles and went really well.Anyone knows a workaround for a bad IP. I got http://192.168.92.1to access the commissioning interface. It loads up but keeps on looping and nothing comes up. Is it possible to use the charger with no WIFI?
that is the ip address I used with no prolem. Yes, you can use the charger with no WIFI. The wifi is so you can get firmware updates, I believe.Anyone knows a workaround for a bad IP. I got http://192.168.92.1to access the commissioning interface. It loads up but keeps on looping and nothing comes up. Is it possible to use the charger with no WIFI?
I had no trouble installing my Gen 3 wall connector before I got the car. I connected first to the wall connector's SSID (using the QR code) and from there configured the connection to my home WiFi.Good questions !!! I am in the same boat. Can not connect even tried manual SSID and password input. Maybe because we don’t have the car yet ??!!