Search results

Yep it was replaced under vehicle warranty. One of the mobile technician mentioned that there would be 6 month warranty if it fails again while other one mentioned 1 year. Guess I would know next year as my car won't be under warranty. Better check with the SC , doubt they would consider 18...

Hi All, I have a MX 2020 model bought in Dec 2019. This year I finally got a 12v battery warning in July , Tesla came and replaced it. Got same warning again in Oct and Tesla came and replaced. Now again I am getting the same warning. Have a mobile appointment scheduled to get it replaced...

1400.. wow thats huge. Mine never touched that much. Something is happening for sure after frontshaft replacement but no one knows. It anyways goes higher in winter so I have just accepted it as Within Spec :)

Service advisors found the usage bit high but still within range . I insisted that they should at least check the logs. There they found a hvac related alert "temp_aux hvac evap alert" and asked me to leave the car for some thermal test. They didnt find any issue and I picked the car next day...

Thats what I am thinking as well. Reached out to service center and they asked me to set up a virtual appointment first.. Hope they dont ask me to pay for their mess.

Yep depending where I drove. We do not use heater that much so on average driving less than 350. Now its 400+. I keep that wh/mi numbers on behind the wheel display so sudden change is noticed immediately. This started happening in last 4 weeks.. it wasnt that cold when I noticed it first.

I asked specifically about alignment and they told me that it wont be required. They replaced the front shafts and again replaced it after an hour of testing. In invoice I have two entries one for front halfshaft replacement and again new RH frontshaft replacement. They might have messed up...

Wow that would be nice. 5% is not small.

Hi All, My 2020 LR was recently in service for front half shaft replacement ( usual shudder problem ). After service I am experiencing elevated wh/mi values. I understand in winter its bit higher but current values are above that. On highways where I used to get around 300 now same is 400+...

It's mentioned but none of " Legacy " ones have got it seems. There might be some some incompatibility because of screen orientation.. hope we get it soon.

Looks like all MX have been excluded from this update. My 2020 X has FSD beta and get updates right after release. No luck this time :(

Same here. I have a 2020 Long Range MX and its showing 100D.. either its a bug or may be they are getting ready for refresh and renaming pre refresh ones to 100D / P100D who knows :D

After more than 3 months of my PTO and paying through cc, finally the "Final Payment" button is gone from my account. Also got an email two weeks ago that referral check would be sent in a week.. yet to receive it through.

That might be true.. they don't even acknowledge that its a problem. Don't know if referral is dependent on that or not. Did anyone who referred themselves and paid by CC got referral bonus ?

They mentioned 10 weeks from PTO. Its almost ten weeks for me but nothing yet :-). It infact still asks me to the pay the final amount when I login to my Tesla account. Surprised to see that it takes such a long time to sync after payment. I paid through CC .

Same thing happened to me this morning. Logged out of the app and then logged back in, it worked. Everything working now.

Dont know why they had to make it smaller. They could have freed up some screen space to show upcoming FSD ui without reducing the font size. Its hard to read now. First time I am not happy after an update :-(

Same here.. its more than two weeks for me now. I am sure it shows paid in their system everywhere but just not online.

You would have to wait for an invoice. They would verify all the details on your invoice then accept your payment. However its weird that they did not sent you an invoice but processed for PTO.

After couple of back and forth emails , Tesla submitted all the paper work last week and i got PTO today :) PGE took just 3 working days..

For my 4KW no PW system, so far it was all good. Now I am stuck in interconnection process. They finished one form but I am running behind them for second one now, already delayed by couple of days. Without it PGE won't start reviewing the PTO request. Project advisor so hard to reach, and he...

Yep checked with PGE and they confirmed that they have not received the B form. Wondering if advisor doesn't know then who is going to fill and submit it.. my A form submission was copied to [email protected] as well. They should know what needs to be done. Unnecessary delay..

Looks like I am caught in that storm :( My project advisor replied saying that he cannot see what documents are done and what is pending.. :(

Wow, that was quick. Looks like 79-1151B-02 is still pending in my case. I did not get any notification of its completion.

My inspection for a 4kw and no PW system was done last week and it passed. Got an invoice same day which i paid as well. I was told that after inspection I won't have to do anything and everything would be handled by Tesla. However I got an Agreement and Customer Authorization form from PGE to...

8779737652 It was mention in the forum only.

My inspection was done yesterday (Friday) and got an invoice within an hour. Tried the number today ( Saturday ) and they were available. I just told the lady that i need to pay by card and there is no such option to do that. Without any hesitation she took the card details and sent the receipt...

That update seems to have fixed it. There was no word from the service center about the new firmware, guess they were not sure if the upcoming update was gonna fix it :-) Anyway glad it is fixed so going to cancel my appointment.

I have raised a service request for this issue. They did ask some info over text but after that no updates. They might be waiting for an update from engineering team, who knows.

Samething again tonight, between yesterday afternoon and today morning 3% down. My rear camera was also very hot. You are right something going on with it.

Same here 2020 LR on 2020.20.12 and for past few days i am seeing 3 - 4% drain everyday while car is in the garage. Sentry mode off , no teslafi and summon on but it is like that for couple of months now, seeing that kind of drop now only.

I had similar problem with my 2020 MX. Key fobs were not recognized and app was also not working properly. Lock/unlock was happening through app but couldn't drive. Opened road assistance request and they did a remote reset. Everything was fine after that.

Its good for testing purpose only, I doubt many would use it like everyday. I tried it on empty roads ( lockdown ) and it worked as expected. However being on autopilot means just going straight and can't change the max speed limit. Also I felt that we need to press the accelerator pedal closer...

Yaa first time its scary. Luckily didnt happen again for me (yet):)

Its our bad luck :( Mine was built and delivered in last week of December still its E. Better to not think about range update and enjoy all other features ( when get a chance to drive - "Shelter in Place" :( )

Thank you :-)

Recently got a license plate (vinyl) wrap for my MX LR Raven. Now wondering about correct location to install it. Couldn't find anything in the manual. Its a one time application and I am afraid if I do it wrong it might block the sensors. Please advise.

If it is a hardware change, I wonder why it is not applicable to performance versions. Or are they upgrading only LR versions and keeping Plaid upgrade for performance ones. My MX LR was built around Christmas last year.. well within last few months duration:p Fingers crossed.

Did you do anything to enable cross traffic alerts ? I could not find any settings related to that. My MX never beeped for cross traffic but it does for closer obstacles in reverse.. Its 2020 LR.

+1 for # 1,2,8 and 9. Hopefully we get it in some update :-)

I saw one message on Facebook group as well. Well as other experienced members say.. better to ignore and expect that an update would fix this bug. Must be some edge case condition we dont know about. It creates little bit of distraction while driving though:-)

I am bit relieved that its not just my car :P First i thought something hit us (like the hammer in a recent video with M3 lol ). Soon realized that everything else was normal. Good that reboot fixed it but there must be a reason behind that abnormal behavior. Root cause analysis of the bug ;-)...

Today while driving a weird thing happened. Heard a really loud pop and all audio stopped. No music , no radio no ding dong chimes not even turn signal sound everything stopped. Music was playing but no sound coming out. I was on NOA around 75mph and there was no change there, other than sound...

Yep I agree, higher speed limit made it uncomfortable. My speed limit was set to +5 only but in a previous section i had manually increased it to 75 by using the autopilot stalk, just wanted to check if it allows me to go beyond the set limits. And then forgot :-) Now i dont do that and with + 5...

After few more road trips I feel more comfortable with autopilot now. May be bit more comfortable that the car decided to punish me once by disabling autopilot for the rest of trip. lol. I had my hands on the wheel but it wasn't enough i guess and i might have ignored all the ding dong sounds...

I finally tried the 3D Maxpider mats and it definitely cuts down the road noise. Not much but enough to feel the difference. Thank you for the suggestion :) And you are right, these mats are great !!

Yes pacifica is quieter. In MX i had to ask the person sitting in third row to repeat what she said, it never happened in Pacifica ( same person :) ) Having said that there is no comparison between these two, totally different segments. Positives in MX outweigh the negatives by a fair margin :)

I also suspect something similar. Missing insulation somewhere. Have an appointment next week. Hopefully they would accept it as an issue and take a look.

I have also ordered 3D MAX ones. Hope that would help me too :)

I did walkthrough in the garage and checked the seals, nothing seems off. I have an appointment to fix a panel gap in frunk so i would ask them to take a look at the noise issue. Its not that big of a problem as we discussed it only few times during the trip. Most of the time we were admiring...