Search results

Look forward to your new products

Anyone else with a Plaid or refresh try the adapter? It doesn't work on my car.

Sold

The charging cabinet is rated to a Max 288kW combined for all three charging stations.

@Akikiki That's the rated maximum continuous output of each charging station. I'd need to see the specification plate of the charging cabinet, which supplies the current to the three charging stations.

@mociaf9 Yes all three charging stations can charge at the same time. I'm curious what the total kW output for each pallet is?

Nice, cheaper than HECO DCFC.

It's open at last!

Yep I have two chademo adapters. One from 2017 and 2021. Both were updated at the SC in October.

I've got 2021.44.6 and just tried the Chademo and a Volta DCFC with a Lectron CCS adapter and neither work.

I think it works great. I notice a significant reduction in the low hz. ARNR is only active with windows closed. ARNR only works for front passengers. ARNR is only active when it states that it is 'active for the front passengers' (I forget the exact verbage) Calibration takes approx 1/2 mile...

Unfortunately the late model 2021 S and X still is unable to DCFC. After every software update I try at HECO and Volta DCFC. No luck and I always get Comm errors. If someone wants to borrow the CCS adapter and try at the Volta DCFC let me know.

@RB_PB what's better the wreath or ccb rotor? Got the front kit installed, but unfortunately don't have my 20" yet. So the rears will need to wait. Fronts fit like a glove.

Boo no one, my big brakes come in on Friday. 😔

It's powered, but you can't activate the charger yet. You need to activate via the Volta but app. The DCFC haven't been added to the map.

Factory grommet through the firewall, just behind the OBD connector (visible in the bottom left) Installation location of my ALP control box, bluetooth module, speaker, gps ect. There is a generously spaced area adjacent the accelerator pedal, within center console area. Three laser jammer...

I've got a big brake kit arriving in 2 weeks and my 19" plaid wheels wont accommodate the brakes. I've ordered new 20" wheels but they aren't arriving for 2-4 months. I'm looking for someone with stock 21" wheels who is willing to trade their wheels for my 19" few months ++Cash. @nanimac

No, No, No!. Come on, you can do better than that. Didn't I show you where to run the wires through the firewall?!

Yes, I understand that. But my opinion if that is your only option you shouldn't be purchasing an EV. For you guys that need a CCS adapter you can use this one CCS Adapter. I was hoping this work work on the HECO charger with the new M/X. But the issue lies with the new M/X, chademo and CCS...

42

Ya I spoke too soon, an update and even a brand new adapter didn't work. I even have a CCS adapter and it doesn't work. Tesla reached out to me and they are aware of the problem

NICE 🤤

Behind the passenger wheel well

I haven't had a need to search for one. First place I would look is the power wire for the Subwoofer. That must be switched as there is no need for that to be powered when the car is off.

We're discussing here 12V Access: Model S 2021 Refresh

Want that rear diffuser, who do I contact?

Honolulu tesla is aware of the problem.

Don't hold your breath 😵

Three Volta DCFC located on the second floor parking by Nordstroms. You will need a CCS adapter to use it. This is what I have, CCS Adapter. Don't know if you tried but the Chademo adapter won't work on your Plaid at Heco stations.

@RB_PB Any modification to the dust shields? Too bad on the rears, I'll need to wait for my 20" to arrive.

Currently 11EA L2 chargers in operation 3EA L2 Chargers in service 3EA L3 DCFC in service

Time is money and free charging is a waste of time.

I believe the system continues to run to dry the evaporator and related accessories. Likely to reduce the chances of mold, mildew, sludge etc. growth that could cause odors. My car does the same.

Thanks can't wait for my ccb Kit to arrive

Am I safe to assume I can save $350 if I opt to use the ZR1 rotors with this kit?

Please prepare a proposal for a 390/390 CCB kit.

No 390 ceramics for the rear?

Cut the shields...

How about OE Caliper BBK 390/390 with ceramic rotors?

I pretty sure the wireless charger isn't constant. I have my laser jammer connected to it and I believe it turns off after a few minutes.

Yes its located in the driver's left footwell. It's an 8AWG which comes from the driver's side VC front. You could disconnect the harness from the VC or just pull the battery. Then cut and splice in a new fused distribution block.

TAP or cut this positive wire going through the firewall for unswitched power. I was going to cut this and install a fuse block, but ended up taking unswitched power from the rear control module.

1099284-00-e

Make a package and ship a kit to me. I've got my paypal on standby. 💰

10" is typically the manufactures max width for a 255 tire. Just check the manufactures tire specs, it will list the approved wheel widths.

Better than nothing. Doesn't look like we're going to see the superchargers this year, typical tesla 🙄👎. Nice to see volta installing DCFC at ala moana center. At least someone is expanding they're charging network. I can't wait to try them. Hopefully they charge a little faster than the 40 ish...

You'll need to wait, car can't go over 260 km/h yet

Any brake pad options other than Racing Brake available yet?

👏 Watching for updates. Can't wait to do it to my car

Apply the accelerator and brake at the same time if you're having problems getting bedded and heated up. It will eliminate the regen and keep some motor torque.