I'm having reliability issues with a Pi Zero W that I was hoping to get some help fixing. The setup went without any issues, and I'm using the latest stable release (v1.3). I do have V10 installed, although the issues were still there prior to upgrading.
Basically, the Pi zero will work for a day or so, and then it'll lock up the Tesla USB port it's plugged into. Usually happens after the vehicle goes to sleep and I wake it the next morning, etc. I know the USB port is locked up, because if I try to plug in an SSD or other USB drive there, it's no longer recognized. Once I reboot the MCU, the USB port is active again. If I try to plug the Pi zero back in, it will attempt to boot and then rapidly flashes. I am unable to ssh into it when it's in this state.
When I boot the Pi zero outside of the car, it boots no problem and I can ssh into it, etc. I've re-imaged the SD card a few times, and performed the self-updates, all with the same effect (it'll work for a day or so, and then lock up the USB port). In fact, it's sitting here plugged into my computer, peacefully giving me the two blink flash.
Vehicle is a Model 3, build date 9/19, vin 5XXXXX
Any ideas? Anyone have similar issues? Any help would be appreciated! When it works, it's great, and I'd like to not abandon the project.