For those of you that are planning to DIY the model 3 suspension, you have probably read lots about needing a thin-walled 13mm socket for the front suspension. Other posts have offered an alternative approach that doesn't require removal of the 13mm nuts while the suspension assembly is installed but seems that if a 13mm thin-walled socket is available, it may make the job easier.
My research lead me to the Stanley Proto J7013MHT 3/8-Inch Drive Thin Wall Deep Impact Socket, 13mm, 6 Point on Amazon. The Amazon reviews are mixed. One purchaser noted: I see no difference between this and a regular wall socket. If you are looking for a thin wall socket, this is not the one for you." I decided to buy it anyways and here's a pic of it.
Although I have not tested it out, I'm guessing this one will do the trick.
My research lead me to the Stanley Proto J7013MHT 3/8-Inch Drive Thin Wall Deep Impact Socket, 13mm, 6 Point on Amazon. The Amazon reviews are mixed. One purchaser noted: I see no difference between this and a regular wall socket. If you are looking for a thin wall socket, this is not the one for you." I decided to buy it anyways and here's a pic of it.
Although I have not tested it out, I'm guessing this one will do the trick.