Upon further looking into this issue, I found that the TParts data module is compatible with USB hubs. The issue or challenge is the dual port USB hubs and the design or layout of the TParts data module in relation to the Tesla USB panel it attaches to. The USB ports of the TParts data module do not allow a dual port USB hub to seat or attach well enough into the module when attached to the Tesla console panel. Attached are pictures I took of the TParts data module with and without the exterior console panel attached. Based on my observation, without the panel attached both power and data function. However, with the panel attached, either only power will function or neither power nor data will fuction, as again the ports on the Jowua hub in the picture aren't permitted to seat well enough from the TParts module with the panel attached to provide power or data.
Additionally, I used the LED on the Jowua hub to provide a visual indicator of working and non-working scenarios.
@TPARTS - Are there any plans to potential redesign the ports on the data module to enable dual port hubs to work with the module?