Olle
Active Member
Finished my install tonight. Very happy with how smooth it went. Should take half and hour but took me two hours because I became OCD and decided to clean the innards of front before I put it together.
Here are my tips:
The service manual is now free for the public, see service.tesla.com. Extremely good manual, helpful for this job.
No need to disconnect the frunk access panel even though the manual says so. Instead, move the panel diagonally through the tub hole as you lift the tub out of the car.
Couldn’t find order number for the two M6 *40 filter housing retaining screws so used generic ones. You need very large washers, at least 25 mm.
Careful nut to pinch the orange high voltage cable as you tigthen down the new air duct.