Software Update 2018.39 4a3910f (plus other v9.0 early access builds)

[SeBsZ]

Looks like we are calibrating the fisheye and both repeaters... video to come once I get home

Trying to hunt down a truck for you guys

View attachment 338606

Thanks for what you're doing! Do you think this indicates that the pillar cams aren't activated/used yet in this version of v9 but just the repeater cams?

 

[Tim-in-CA]

Looks like we are calibrating the fisheye and both repeaters... video to come once I get home

Trying to hunt down a truck for you guys

View attachment 338606

Where in the UI can you see the status of camera/sensor calibration? Maybe I missed this in v8.xx UI

 

[SeBsZ]

I believe you can only see that screen if you have root or engineer/factory access

 

[Asterix187]

Its not in the UI. @BigD0g is 1337

 

[croman]

Thanks for what you're doing! Do you think this indicates that the pillar cams aren't activated/used yet in this version of v9 but just the repeater cams?

Verygreen said all 8 now including backup camera will operate now with 2.5. I believe @BigD0g has 2.0 like me.

 

[dennis_d]

Verygreen said all 8 now including backup camera will operate now with 2.5. I believe @BigD0g has 2.0 like me.

They have NN for all 8 cameras but it looks like only 6 are operational at this point. Seams like right/left pilar cameras are not calibrating, only repeaters, fisheye and rear, two others were calibrated a while back.

 

[bmah]

Moderator note: Moved six posts discussing blindspot monitoring and related sensor technology to a new thread:

Blindspots and sensors (overflow from 2018.39 thread)

Carry on...

Bruce.

 

[nemSoma]

I believe you can only see that screen if you have root or engineer/factory access

Yep, those are visible only on the diagnostic/developer screens.

There is one thing that I find interesting: the dual app display mode is still there lying deep down in the framework.
If you turn on dev/diag mode the diagnostics app will still act like an old style app

 

[SeBsZ]

That's what we'd like to call spaghetti code. Or Microsoft Windows...

 

[nemSoma]

That's what we'd like to call spaghetti code. Or Microsoft Windows...

And that's why I use a Mac

 

[BigD0g]

Horribly shaky video, but if your patient you'll see I let the truck catch me from behind. Special thanks again to @nemSoma for the image

And that's why I use a Mac

Ditto

 

[BigD0g]

Thanks for what you're doing! Do you think this indicates that the pillar cams aren't activated/used yet in this version of v9 but just the repeater cams?

No, they are being fed into the nueral networks, so they are being used at least to some extent.

 

[dennis_d]

Another note, tesla added a new setting to car config it pushes from mothership to your car, so they can easily control which features are enabled ulc_without_confirm: false which controls one of drive-by-nav features

 

[SeBsZ]

I meant because the calibration shows them at 0%.

 

[nemSoma]

Another note, tesla added a new setting to car config it pushes from mothership to your car, so they can easily control which features are enabled ulc_without_confirm: false which controls one of drive-by-nav features

I suspected they use featureConfig but didn't have time to check it out yet. Nice!

 

[BigD0g]

And here for your viewing pleasure albeit shaky video a truck on the IC

 

[lunitiks]

Calibrated repeaters?

 

[UNSTPBL]

Verygreen said all 8 now including backup camera will operate now with 2.5. I believe @BigD0g has 2.0 like me.

Does this mean with 2.5 all cameras work but with 2.0 only 6?

 

[SeBsZ]

Looks like the truck turns into 3 trucks sometimes? Thanks for the video. Really looking forward to the first on ramp to off ramp autopilot video.

 

[BigD0g]

Looks like the truck turns into 3 trucks sometimes? Thanks for the video. Really looking forward to the first on ramp to off ramp autopilot video.

yah, it's get's very confused I guess for lack of a better work, glitchy might be a better word to use I guess. Happens a lot with stopped cars as well i've noticed.