agreed, as I said I am not aware of iPad specific app, some one here mentioned. I wish Tesla take advantage of this real estate and make proper app for iPad!That’s just the iPhone app magnified view.
You can install our site as a web app on your iOS device by utilizing the Add to Home Screen feature in Safari. Please see this thread for more details on this.
Note: This feature may not be available in some browsers.
agreed, as I said I am not aware of iPad specific app, some one here mentioned. I wish Tesla take advantage of this real estate and make proper app for iPad!That’s just the iPhone app magnified view.
That is correct. There is no iPad specific APP. Sorry, I thought they meant that you cannot use the new APP on the iPad at all.I am not aware of iPad specific app. Are you just stretching the iPhone app on iPad?
I don't understand this comment. My graphs all have the zero, min, and max shown at the right hand side.in this new version, there is no vertical scale on the graphs!
In the V3, I love having the ability to put ALL 4 energy parts on top of each other. Can this still be done on V4? From you post, it looks like no?I don't understand this comment. My graphs all have the zero, min, and max shown at the right hand side.
Example:
View attachment 703790
No, you cannot. I think this is the major drawback of V4 update.In the V3, I love having the ability to put ALL 4 energy parts on top of each other. Can this still be done on V4? From you post, it looks like no?
That and the removal of balanced mode.No, you cannot. I think this is the major drawback of V4 update.
The scales are showing up now, but they were not there earlier today. I knew I should have taken a screenshot.I don't understand this comment. My graphs all have the zero, min, and max shown at the right hand side.
Example:
View attachment 703790
This is my #1 issueThat and the removal of balanced mode.
Have you tried extending your peak time in the app past 9:00PM, or setting 9:00PM-6:00AM (for example) as shoulder? My thought would be that the system should continue to discharge your PWs the same way from 5-9PM, but that by changing the setting, you might get it to keep draining the PWs further because it still thinks you are on peak or shoulder. As long as the change doesn't cause the PWs to discharge less during 5-9PM window, it would hopefully improve your situation overall.Hi,
Thanks for all the insight here. I am very frustrated by the removal of balanced mode. I have ToU with peak from (.50 kWh) from 5-9 weekdays and off peak the remainder at .13kWh. My buyback rate 24/7 from my utility is .069kWh. In balanced mode, the system did a reasonable job of protecting my system so I never, ever bought from the grid during peak hours, but also didn't have the "intelligence" to understand the delta between my incoming/outgoing rate during non-peak (so it wound up storing too much power during non-peak but I was okay with the tradeoff).
Now with Cost savings, it seems to limit powerwall distribution only during peak hours, so my overall cost is increasing since I'm not using the powerwall during non-peak times.
Any thoughts on how to improve this? And yes, i'm emailing service to ask they reinstate balanced mode but it seems like tweeting Elon might be the better approach!!
Thanks so much for the guidance of this community.
Do you currently have a part-peak period scheduled? Even if your utility doesn't have one, you could create a fake one and see if your Powerwalls would discharge during that period. Since there is no scheduled self-powered mode, we've used the balanced mode for nearly 3 years. We have our peak period set for the correct hours but have used an extended part-peak/shoulder period for another 18 hours of the day. This allowed the Powerwalls to continue discharging and powering the house for about 22 hours a day.Hi,
Thanks for all the insight here. I am very frustrated by the removal of balanced mode. I have ToU with peak from (.50 kWh) from 5-9 weekdays and off peak the remainder at .13kWh. My buyback rate 24/7 from my utility is .069kWh. In balanced mode, the system did a reasonable job of protecting my system so I never, ever bought from the grid during peak hours, but also didn't have the "intelligence" to understand the delta between my incoming/outgoing rate during non-peak (so it wound up storing too much power during non-peak but I was okay with the tradeoff).
Now with Cost savings, it seems to limit powerwall distribution only during peak hours, so my overall cost is increasing since I'm not using the powerwall during non-peak times.
Any thoughts on how to improve this? And yes, i'm emailing service to ask they reinstate balanced mode but it seems like tweeting Elon might be the better approach!!
Thanks so much for the guidance of this community.
Yeah, I just got it. Thought it might mean the app was available in the google play store, but still not for me.Did everyone just get the email about the "new features"?
Yeah, interesting that they decided to send out the email before the app was actually available to a majority of owners.Yeah, I just got it. Thought it might mean the app was available in the google play store, but still not for me.