You can install our site as a web app on your iOS device by utilizing the Add to Home Screen feature in Safari. Please see this thread for more details on this.
Note: This feature may not be available in some browsers.
Hi Psycho Bunny. Do you have any pictures that you can share of the promaster jack in action with your model S? What was your overall impression?hope these work for you.
Photo of it, right in the first post.Anyone have pics of how and where to jack up a Model 3 from the Lower Control Arm as the OP says?
Rear was a little tricky. It has a plastic cover over where I like to lift it. I made a spacer out of PVC trim board to slip between the cover and the bottom of the strut/shock. So that the plastic cover would not crush. It Worked perfect.Sorry, I meant to specify Rear Lower Control Arm.
Cool! I've just been using OTC LDJA2, same as mobile service techs, for seasonal swaps. What did you use to saw the nubs down to size? Filing was incredibly slow so I gave up and Dremel might take a while, not to mention limited cut depth.2012 MS P85, #2446
Got two Porsche jacks. $135 for one from junkyard in LA area and $26 (yes, seller wasn't aware of current market value) from private party in Mesa, AZ. Will use one to jack and second as safety backup. Still unsure if I'll use second as pictured or on suspension.
Thank you to this thread for great ideas. Now that I've got these jacks, I'm certain to not have a flat
View attachment 903394View attachment 903395View attachment 903396
Used a hack saw to saw nubs down to size. One cut from top, turn 90 degrees, then second cut took it off. Then took file to round edges. 5 minutes, tops.Cool! I've just been using OTC LDJA2, same as mobile service techs, for seasonal swaps. What did you use to saw the nubs down to size? Filing was incredibly slow so I gave up and Dremel might take a while, not to mention limited cut depth.
Yes, fits just fine.Does that Porsche jack and foam case fit in the lower trunk compartment? Maybe just the jack?
With the molded foam thingy or just by itself?Yes, fits just fine.
It will fit with the foam carrier.With the molded foam thingy or just by itself?
Why are you selling it?Selling mine, Porsche nub has been cut down to fit Tesla mounting points. I've used it twice, lifts the car as expected. I also fitted a 1/2" drive scissor jack adapter. $200 + shipping.View attachment 920465View attachment 920466
Don't need it, ResQ+ pump/seal kit says leave puncture item in. If it's too large, I can have someone bring floor jack and a full size wheel from home, or if too far, will have to deal with tow/repair.Why are you selling it?
Understand. I've got two of these - one to jack up and second as safety under the suspension parts.Don't need it, ResQ+ pump/seal kit says leave puncture item in. If it's too large, I can have someone bring floor jack and a full size wheel from home, or if too far, will have to deal with tow/repair.